Zerto Reviews

We primarily use Zerto for our critical applications and infrastructure to allow immediate failover at our DR site. We licensed our critical applications and database servers and standard backup the rest. In order to increase uptime, we replicate our entire Active Directory infrastructure as well.

We are able to pass many financial and IT audits because we have a solid system in place with zero RPO/RTO. Furthermore, we can train almost any tech or engineer on the process of flipping to the offsite primary. The button and some minor DNS changes and we are up and running.

The ease of failover and test environments has proven invaluable. It is literally as easy as pushing a button to flip to a contained test environment for staging roll-outs or verifying backup integrity. The upgrade process initially was tedious, making sure every VM host got updated separately, but now it is streamlined and a breeze.

I would like to see better notifications when the sync is off for an extended length of time.  There is nothing worst then going to do an upgrade or test a restore and realizing some of the VPGs need to be fixed because their journal is too small causing bitmap syncing to be off.

Stability is tied to the latency of your offsite DR.

The scalability is directly correlated to your storage and compute. More licensing as you grow is all you need.

The technical support for this solution is great. Every time I have had an issue, I get a real person, quickly, who remotely takes over and repairs the issue.

We were using RecoverPoint by Dell EMC prior to this solution. We switched because it was extremely cumbersome and far from streamlined during failover.

The initial setup of this solution is straightforward. It's literally an install button and then next, next, next... 

Zerto assisted us with the deployment.

Have not had to failover often but the ability to test product upgrades has been invaluable.

The cost is not dirt cheap but also is not terrible.

We thought about VMware Orchestration.

If you are looking for an extremely easy solution to implement and is highly effective then this is your baby.

We use Zerto to protect our staff information against ransomware and is outlined in our disaster recovery plan. We have a DR site that we failover to if anything happens at our primary data center. We have only our core services, that we could not live without, being protected.

It is very easy to use. Almost anyone in our IT team can manage it after not using it for months at a time. As the DR strategist here, I like that. I enjoy having a fast way to bring a server back up. It will take me longer to get to my desk and log into everything than it will to actually complete the failover. 

I really like how you can test the failover as often as you need.

The reports it generates are very good at showing our protection state.

It is self-healing in case I mess up on something and need to re-sync. When you are protecting Terabytes of data, this comes in handy.

I think Zerto could do better with size planning because it would be nice to analyze a server for a week and give an estimate on sizing the Journal. I find myself estimating too high.

It would be nice if I had an option to dynamically restore to any host in a cluster. Right now, if we have multiple things happen and the main host is down it will not work. 

We are only using a fraction of what it can do. If you add the backup function it scales very largely. I could see a hospital really finding this product useful.

My first experience with technical support was not good at all. In the last few years, it has improved quite a bit. 

Prior to this solution, we used storage mirroring and DFS syncing. Our old way used far too much storage. Zerto compresses the data well. 

The initial setup of this solution is very straightforward. We were making initial syncs in forty-five minutes. 

We did both, with most over the phone. Their expertise was fine. I didn't in any way feel like I was not getting my questions answered. 

Our ROI happened in nine seconds.

I don't remember it being cheap. We started out slow, which was a good call. We found that in an event that was massive enough to cause an entire cluster to go offline we would be happy with our core services up and running.

At the time, Zerto was the only product doing this so easily. It might still be.

Don't underestimate how good it feels to rollback data instantly. It makes me look like a Wizzard at my desk. 

After working with the product for about 6 months, the fact that you cannot only replicate virtual machines to another location, but the fact the you can group and configure various boot orders, with time delays is a valuable feature. There is also the ability to change the networking properties such as the IP and MAC addresses, DNS entries, and other options.

At this point we are not fully using the product for disaster recovery due to the fact we are not 100% virtualized. The hope is that within the next two years, it will greatly simplify our DR testing since there is a "failover test" option. This allows the systems to be brought up in an isolated bubble for testing. It will also allow all of the restores to be synchronized to the same time.

The one area I see a need for improvement is supposedly on the roadmap, which is to be able to replicate to multiple locations.

6 months.

No.

No.

No.

The account representative have always been helpful, even offering to get a product engineer on the phone to assist with configuration items if needed.

I have only had to contact technical support once and in that issue they responded very quickly and had the issued resolved with an hour.

There was a small RecoverPoint with SRM configuration, but it was difficult to manage and keep updated.

The deployment was very straight forward. A small plugin called a VRA is installed on each host. This keeps track of the virtual machines. Then, there is a dedicated virtual machine that runs the Zerto Virtual Manager (ZVM). This is provides the web management interface and monitors the VRA's. This is also where all configuration and updates are performed. The menus do a great job in guiding you through the configuration of the protection groups.

The deployment was done in-house with the assistance of an implementation engineer over a web session.

An exact dollar ROI has not been calculated. The largest gain will be seen in man hours used for DR testing as well as the management of backups and recovery. This will turn what is now a very manual process into a fully automated recovery.

If you are planning on using this with a hyper-converged appliance running anything other than VMware, you may want to verify compatibility. On many of them, they are only compatible with VMware running, although they are adding other hypervisors. At the time of this writing, according to Zerto, they are not compatible with Simplivity at all.

No.

For all the most important applications, we are using Zerto as a hot site in case something were to go on with our on-prem data center-based applications. We can immediately resort to Zerto as a failover.

It's deployed for replication from our data center into the public cloud.

The most important thing is the mean time to restoration. When anything goes wrong, we should be able to rely on the failover data that is available, and we should be able to restore it as quickly as possible. We have been able to reduce that mean time to restore the data pretty significantly with Zerto. It's gone from a few hours to a few minutes.

There are two things that are keeping us with the solution:

1. It does a very good job of keeping the data in sync at all times. 
2. In the event of a failover or in the event of a contingency, we are able to retrieve the data very quickly without any issues.

Both of these points are valuable to us because we have application data and it means we keep the data in sync. It is very important for us to know exactly where we left off in the event of any disaster or contingency. We can always rely on, or resort to, the data that we have as a backup or a failover. Also, in the event of a contingency, or even for doing a mock contingency exercise, the speed of retrieval of data and the speed of getting back up and running — minimizing the downtime — is important. That's where the second feature comes into play.

There are two areas which I would recommend for improvement. One is when we are trying to upgrade any virtual machines, we have to stop the virtual machines that have been replicated in Zerto and then upgrade or update to the virtual machines onsite. Instead of having to do it manually, there should be some way of automating that particular function.

And when it comes to AWS failover, the documentation has a lot of scope for improvement. It's come a long way since we implemented it, from the scantiness of documentation that was available to do a failover into AWS or recover from AWS, but they could still do a much better job of providing more details, how-to's, tutorials, etc.

In terms of additional features that I would like to see included in the next releases, if they could provide us some kind of long-term storage option, that would be the best thing. Then it could be a storage and a failover solution combined into one.

I have been using Zerto for two-and-a-half years.

It's a very stable solution.

It scales very well, in terms of the data size and the number of sites that we want to add on. It has scaled very well, at least in the last two releases.

We have plans to increase usage, but as it is we are using it for about 75 percent of the data at this point. The balance of the data will come onboard by early next year.

We have about 25 people using Zerto, and they're mostly database and storage administrators, infrastructure people, and security people. 

We have not used the technical support. One thing I can say is that they have a very friendly team of engineers. If you have a problem, they are at your beck and call. You can call them and get it resolved.

We were using another solution but I don't want to name it. The primary reason we switched was the ability to restore the. Our main goal was not only to have good replication of data, but to be able to restore the data as quickly as possible in the event of any contingency, whether planned or unplanned. 

From that standpoint, when we put Zerto against the existing product, what took us a few hours in that product took us a few minutes with Zerto. That was primarily the goal. Even though this product was a little more expensive than what we had prior to going with Zerto, we still went ahead with Zerto.

The initial setup is very straightforward compared to a lot of others. The user interface is very simple and very intuitive. It goes one step at a time so you can logically follow through the steps to set it up. Whether it's a small site or a big site, it doesn't really matter.

Overall our deployment took about two weeks. We had a detailed project plan, as we always do with any new products or projects that we come up with.

It doesn't require any full-time staff to deploy and maintain the solution. Once you turn on the process, all that somebody needs to do is just monitor the schedule and see whether it's doing things the way it has been programmed.

We have absolutely seen return on our investment with Zerto. We do mock disaster recovery exercises and, in every such exercise since we've gone ahead with Zerto, we've been able to restore the data within a few minutes, very easily, without any business loss. That gives us the confidence to say that, even in the case of a real disaster, we should be able to restore the data.

We didn't evaluate any other options.

Know your use case and then do a thorough proof of concept with your use case to see whether the solution works for your environment and your specific use case. Have a well-defined project plan and negotiate your way with the vendor.

The biggest lesson our organization has learned in using Zerto is that you should understand the product very well. You should understand what the product is capable of doing and leverage the options and features that are available in the product to the optimal extent. 

We use Zerto to keep a replica copy of the core servers we have running at our backup site. In the case of an outage, we are able to flip over to our backup location. Zerto keeps these servers up to date within seconds and in the case of an outage at our core data center, we can flip over services with little to no data loss.

Mostly what Zerto gives us is peace of mind. 

We do the normal backups and that data gets stored offsite, but unlike backups, Zerto gives us the ability to be back up and running within minutes on a copy of our servers that is an identical copy of what is no longer accessible.

The features we found most valuable is site-to-site replication. This is what we purchased the product for and what we use it primarily for. We are in the process of switching over our production data center and Zerto has been a true time-saver that has cost us zero downtime.

Some features are not up to what we need, although we have found alternatives and aren't really looking for Zerto to handle those items today.

The setup process is time-consuming.

We have been using Zerto for around four years.

With its built-in notifications and reporting, Zerto will alert you if there is anything wrong before it can become a problem.

Zerto works for one or one thousand machines and scaling out is an easy process. Zerto also seems to better support the major cloud vendors, with updates as well.

Zerto technical support has been very responsive and has always been able to help. They are available 24x7 and always have someone to contact you right away.

Prior to using Zerto, we were using VMware's SRS. It was not keeping a close enough copy of our servers.

The initial setup was very straightforward, but also a lot of information was needed. A fair bit of time was spent setting things up, but it was really just time-consuming. There was nothing that needed to be done by the vendor.

As far as setup and maintenance are concerned, you need to be sure to set it up properly, test it, and occasionally perform updates. For the most part, once it is in place it is pretty hands-off.

We implemented with the help of Zerto, who was very helpful in explaining the process and how everything works.

Zerto is not cheap but is an invaluable asset.

If you have the need for what Zerto can do for you then the cost really isn't a factor.

We only had experience with VMware's product and didn't know of anything other than Zerto. Once we tried the product we were hooked and never had a reason to look at anything else.

When we implemented Zerto, we only utilized some of the features. This was mostly because of our needs at the time and partially because the other parts were not up to what we needed. They have since greatly improved on these parts, like the backups features, but we aren't really looking for Zerto to handle those items today.

We have never regretted implementing Zerto and I would not trade it for any other product.

Our primary use for this solution is DR Replication to a separate data centre. We use VMware at both sites. We're currently replicating around eighty VMs from our primary data centre in London to our secondary data centre in Beccles. Most of these are SQL servers with the VSS agent installed.

We now have the ability to activate replicated VMs at our DR site within minutes of something happening to our primary data centre. The ability to have a RPO of seconds has enabled us to restore data to just before an incident has occurred, which certainly saves a lot of time and money.

The most valuable features of this solution are its ease of use and simple setup.

The ability to do a test failover to an isolated environment has been very useful, as this allows us to test servers without any implications to our live environment.

The dashboard is very clear and concise, showing any problems in different colours.

The VSS agent setup and configuration does seem to be a bit clunky compared to the rest of the software. We have had issues with licensing, where the license we've been given by Zerto support doesn't include VSS replication, which was a pain at the time.

We use the solution for DR failover/testing on our DR site. We're a Windows/VMware environment and replicate 25 virtual machines from our primary data center to our disaster recovery site. The solution allows us to perform live failovers without shutting down our production systems.

Zerto has made the testing and the actual failover process of our replicated virtual machines seamless. The product has relieved the administrative burden for the IT staff responsible for the disaster recovery implementation of the organization. Adding new virtual machines is quick and easy, and managing the environment is straightforward.  

Failover testing is the most valuable feature. The fact that we are able to test the failover of live systems during regular hours is invaluable to our organization. No longer do we have to schedule failovers of our systems, which brings down our production environment.

There are a couple of minor areas that could use improvement.

The GUI could be streamlined a bit more to enhance the administrative tasks. I would also like to be able to throttle the email alerts, as sometimes they become a bit noisy, and get tough to keep on top of.

Our company has been using the product for four years.

This is a very stable solution.

It is easy to add new licenses for growth.

Support has always been readily available if there were issues.

We never used a different solution.

The initial setup is pretty straightforward and seems to be in line with similar products.

We did not evaluate other products before choosing this solution.

Virtualization, and Zerto improves business continuity and disaster recovery tremendously.

• Continuous replication for VMs
• Ability to choose point in time to recover from
• RPOs in seconds
• RTO in minutes

Adding or changing VPGs (Virtual Protection Groups) may require restarting replication.

The product is very stable; no issues with upgrading to new releases.

Adding additional VMs is fairly easy. Adding or changing VPGs (Virtual Protection Groups) may require restarting replication.

Very good.

Previously we used SRM (Site Recovery Manager). Zerto is much easier to set up and configure. Failover using Zerto is simply a one-button click, and it does everything else in restoring the VMs at a different datacenter (recovery site).

Initial setup is fairly easy and the environment can be protected in just a few hours.

You can find providers of a DRaaS solution with Zerto license fees for each VM. Zerto only sells to partners and they have a robust partner organization.

The product works and does what is says. Zerto provides enterprise-class, virtual replication and BC/DR solutions for private, hybrid, and public clouds. Future releases will provide multiple destinations/locations to store the replicated data.

Most companies have used backup software for their protection, or disk array replication. Zerto leapfrogs those data protection methods and provides a much more affordable BC/DR solution, with improved RPO and RTO.

Zerto is an excellent solution for cloud-based environments, but for DIY clients who have another site to recover their systems it also works well.