Zerto Reviews

We're solving the issues of disaster recovery with it. So, our main use case is disaster recovery. We use it to do real-time replication of our data so that if we needed to failover for whatever reason or we had a disaster at our primary data center, we would be able to spin up in our colo disaster recovery location with minimum downtime. Our delay is about five seconds. So, if something negative were to happen to our data center, our DR copy would be within five seconds of the original copy, which is pretty good. We are also using it for testing.

Our setup is on-prem. It enables you to do DR in the cloud rather than in a physical data center, but we didn't go that route. We went the route of creating our own colo location. So, instead of leveraging Azure or AWS, we decided to maintain our own facility. Our primary data center is on-prem, and our disaster recovery location is a colo location that we control.

The current version that we're using is 9.5, which is the latest. When we installed it, it was probably version 8.

The mere fact that we're able to do live testing has definitely helped us with deployment times. It has helped us with troubleshooting as well.

It saves effort, time, and money. It saves us the effort of having to make sure that information is replicated. It saves us the time that would be required to build that ad hoc, and it allows it to be more of a point-and-click operation than something for which we have to dedicate more time and effort. Especially in our use case, we're not replicating a crazy amount. We're only replicating about 40 virtual machines and about 13 terabytes of data. It's not a small amount, but it's not a crazy large amount either. To be able to load all those 40 machines at one time with one click and then bring them up either in production failover or production test is fantastic. We haven't really been able to find any competitor that can do that at least as easily as Zerto. That was the driving force.

It has helped to reduce our organization's disaster recovery testing. We can now do it in minutes, whereas previously, we could never do a valid test. We could only test that our backups were copied. We could never spin them up and run them all. Barracuda would do point-in-time backups, but we didn't have any place where we could actually deploy and test them all. That's not necessarily a hundred percent on Barracuda, but from basically not being able to do it, we are now able to do it within a few minutes. 

It has saved all the time that would've been spent validating copies of virtual machines. It can now be used to actually test that everything is connected, everything is spun up properly, and everything is connecting and speaking properly. So, there has been a tremendous amount of time savings. People who were responsible for doing it have saved time because they don't have to spend an entire day testing to make sure that the backup is copied properly so that they can be recovered. Now, we can do a test failover in a few minutes and be able to validate it like that.

It helps to protect VMs in our environment. It has been great in terms of RPOs. Prior to using Zerto, depending upon the level of disaster, it took us hours, days, or weeks to recover. Now, the average recovery is nine seconds. That's pretty big. We went from hours, days, or weeks to seconds and minutes to recover.

Its overall impact on our RTOs has been fantastic.

Its main feature is continuous replication. We are able to have continuous replication, and we are able to have the information available as per recovery point objectives (RPOs) and how much data to retain. The real selling point was to be able to have those statistics and be able to test and show that the replication is occurring properly and then to be able to do live passive testing.

We can spin up our environment in DR without affecting production, which is probably the biggest feature for us. We have the ability to do passive testing. We can even test scenarios, such as installing software or changing software. We can make modifications without affecting our production environment. So, the test functionality of being able to test the failover solution and being able to bring up our virtual machines in a test mode is the biggest benefit.

In general, the solution is pretty good, but because it is geared toward simplicity, sometimes, when things go wrong, the answer is not very detailed so that things can be solved quickly. If things do go wrong, it does require a little bit deeper troubleshooting to resolve the issues. That's the only area where improvement could occur. There should be a little bit more details about if things go wrong, how to remedy them. 

Everything is meant to be simple. When something doesn't work, even though what you were trying to do appeared to be very simple, there are probably a lot of pieces behind the scenes. So, to be able to narrow down where in those 100 steps something went wrong can be a little tricky. When there is a failure, there should be a more detailed explanation of what the error is and how to remediate it. Currently, it's a little vague. A part of that could be because we use Zerto on top of Hyper-V. VMware still has a very large market share over Hyper-V and a lot of the information and a lot of the deployment plans are geared towards VMware. So, sometimes, there are new features that first roll out to VMware and then come to Hyper-V.

I have been using this solution for about three years.

It's a very stable platform, but sometimes, we've had instances where we've upgraded versions and went from version 8 to 8.5 or to version 9 to 9.5, and there were issues. When you deploy, depending upon how many host machines you have, something might go wrong with the deployment to a host. In that case, you have to do a decent amount of work so that you can remove your virtual machine and restart the underlying host, which is something that you try to avoid doing, but sometimes, that's required in order to resolve the issue so that you can do the upgrade properly and allow that. When there is a problem like that, it can affect the performance of the system, but that falls more under maintenance and upkeep. In general, it does run pretty smoothly. It comes down to the fact that whenever there is a problem, it's a problem. That's the same with anything. Everything works until it doesn't, but in general, it works more than it doesn't, which is what you want. I would rate it a nine out of ten in terms of stability.

Their tech support is pretty good. We've had issues where we have reached out to them, and in general, they're pretty responsive and helpful. A few times, we've had them jump on to do screen shares and pull information and do deeper dives into some of those errors that didn't have detailed inputs about the area we need to look into, and their tech support has been pretty good. Based on the help that they provided for the issues we had, I would rate them a 10 out of 10.

Positive

We were using point-in-time backups provided by Barracuda. The issue with that was that we were taking point-in-time backups, and we were saving them in the cloud, but if we didn't have a location to restore the data to, the backups weren't very useful. They were useful from the backup standpoint but not from a disaster standpoint. In such a case, our primary data center would be wiped out. We would have our cloud copy, which would probably be a day old, and then we would have to take that cloud copy and download it somewhere where we don't have machines. So, we would have to buy servers or buy something to download our backup copies to and then spin them up. That could potentially take weeks. Now, we already have the hardware in place, or if it was a cloud, we would leverage the cloud, but we already have the hardware in place. So, at any point, it's a matter of enabling, going live, and saying failover, and then basically, having our DR copy become live. So, the time to recover was the main reason for going for Zerto.

We still have the Barracuda solution in conjunction. A lot of that is due to the fact that we already have a long-term contract. We have a five-year contract with Barracuda. We probably don't need to renew that, but there are benefits of both. We have kept both solutions because they do slightly different things. The way we use Zerto is that it's focused mainly on disaster recovery. Barracuda gives us more of a long historical recovery for easily recovering things such as files. We have backups of virtual machines that might go back four or five years. You might argue that it is not worth it because a lot of the data that is multiple years old might not be of value.

The way it would work with Zerto is that we could keep a live copy within Zerto for 30 days. After that, we would have to take that data and throw it somewhere else for long-term storage, which would incur additional costs and adds a little bit. Because we already had Barracuda, we leveraged Barracuda for long-term retention. We don't use Barracuda for disaster recovery anymore, but we use it for point-in-time recovery. We take a backup that gets shipped to the cloud to have an extra copy that is just there, which then becomes part of a historical backup where we could go back six or seven months, whereas Zerto is only for recovering files up to a few days. Anything older than those few days would be recovered via Barracuda.

Zerto can do a backup for or recover data longer than that period of time, but it becomes a little bit different process. When we looked at Zerto three years ago, the ransomware, journaling, and being able to go back a few hours and restore your entire environment back to a point in time were nice features, but they weren't the selling point. The selling point was disaster recovery. So, that's the main thing for which we're using it. We are not looking at the ability to go back 30 days to recover a file. I definitely see it as a plus, but because it wasn't the initial selling point, and the way that we architected things, we don't necessarily use that right now. However, when our contract with Barracuda ends, instead of renewing, we could consider just buying long-term retention through a cloud provider and then maintaining a longer history with Zerto.

There is a lot that goes into setting it up. So, the planning has to be done. We were pretty much able to have it up in a few hours, but it also depends on your use case and the complexity of your deployment. Like anything, there are a thousand ways to skin a cat. So, it depends upon how you want to have it set up. It depends on:

• How complex groundwork do you want to put in?
• How isolated do you want your test case to be?
• How isolated do you want different things to be set up?

There could be a little bit more complexity, but in general, it's pretty simple to get going. Obviously, there is a lot that goes into it, but the actual work of setting it up, once you have those decisions made, is pretty straightforward. It's pretty easy.

We definitely did a lot of planning, but we did the actual deployment or the actual configuration of it before we engaged with the professional services aspect of our deployment plan. When we bought the software, we had a project management plan and support from Zerto directly. We pretty much did all the setup ahead of time by ourselves. So, in our case, the setup was very simple and very easy.

It does require some maintenance. There are always service updates that are available, and occasionally, there will be little bumps in the road that require maybe reinstalling or updating something. In terms of general maintenance, as compared to other solutions, its maintenance is probably a little bit less than other solutions. Maintenance is still required, but it doesn't require an extreme amount of maintenance to keep things running smoothly.

When we went to locate this software, we worked with ePlus. They made several recommendations on different solutions, and from those recommendations, we narrowed it down and picked Zerto.

I liked them a lot at the time. The sales rep that we had there was fantastic. Unfortunately, a few months after our project was purchased, our sales rep left the company, and then we just never really connected with any of the new people. That has not necessarily something to do with ePlus. They're a large, great company, but what really separated them and made that project beneficial was the account manager that we had during that time period. He was fantastic.

In general, it's pretty fair because it is software. In our case, we built our own colo. So, the cost of the colo was very expensive, and that's where a lot of the equipment is. The same thing is there if we were going to spin up in the cloud, but as a solution, in general, it's pretty fair for what you get out of it and how it works. It's not cheap, but at the same time, you get what you pay for, and it's definitely worth the cost. You just have to understand that the cost of the software alone is not the total cost of the project of doing ransomware protection or disaster recovery. It's a piece of the pie, not the entire pie.

We did look at other similar solutions, but what made Zerto the solution that we went with was the fact that it included the recovery of the actual virtual machine. Other solutions had the ability to do the same kind of synchronous or near-continuous data replication. However, if we had the underlying data replicated but our virtual machine's copy or our virtual machine configuration was different or was not at that target location, we would have to then configure those machines to load the underlying data. The feature that made Zerto useful was that it handled that and replicated the virtual machine information as well. So, we didn't have to do that. Once we configure and specify it to replicate a virtual machine, all the data that's associated with it and its configuration is replicated. We don't have to deal with additional steps.

Three years ago, when we were looking at disaster recovery options, a lot of the solutions were targeted at replicating the underlying data but not necessarily how to get that data usable. Getting the data usable part is often the trickiest and the most time-consuming part. So, when you don't have to take that into consideration because it's already being copied and it's current, your downtime associated with a failure event is reduced. That was definitely a selling point for us.

We looked at Veeam, and we looked at how we use Pure Storage for our underlying data storage. They have the capabilities of doing synchronous, real-time replication, which has improved a lot in the past three years. So, the limitations that made it less appealing a few years ago might have been removed now, but at the same point, that's only the underlying data. We would still have to recreate virtual machines that will spin up that data. There is no other real solution that I'm aware of that does this as nicely. Even some of the other Microsoft native solutions aren't as nice and user-friendly. They definitely don't give you the ability to do testing. We couldn't spin up a replicated copy without causing issues. Zerto allows us to spin up a test version of our production software or our production VMs without affecting the production copy.

There is a lot that goes into setting it up. So, the planning has to be done, but once it's running, it's very simple. If it's set up right, it literally involves a few clicks. Testing and failover can be done in a few clicks, which makes a very complex thing simple. So, if you set it up and you have the groundwork done, then with one or two clicks, you could do major testing, and you could do major failovers. From that standpoint, it's extremely simple to use once it's up and running.

They have a lot of other features that we don't really leverage 100%. We use it only for disaster recovery, but it also contains features for ransomware where you can recover files. Although we don't use that feature, that's definitely a benefit. We have recovered files from time to time but not because of ransomware. We maintain a history of up to 30 days for each of the virtual machines that we have. We have a different solution to recover files older than 30 days.

We don't really use Zerto for immutable data copies, which goes into the ransomware where you expect not to be corrupted by ransomware. We use it, but we've never had a case where we had to recover from a ransomware instance or anything like that. We use Zerto only for disaster recovery and continuous replication. We have a separate backup tool that takes point-in-time backups. In terms of the 3-2-1 rule for our organization’s recovery strategy, our separate point-in-time backups give us three locations. At a point, we have three copies of the data in different stages.

It hasn't reduced our downtime in any situations because we didn't need to do disaster recovery. So, from that standpoint, we don't have any baselines before or after.

It hasn't directly reduced the number of staff involved in data recovery situations, but the amount of time required per person or the time required by people for validation has greatly reduced. We never had anybody dedicated to it as their only function, but the amount of time that's required to do testing is significantly less. So, there has definitely been a saving of time. Similarly, there has been no change in the number of staff involved in overall backup and disaster recovery management. In theory, it wouldn't because, in most IT organizations, a lot of people wear different hats at different times. We didn't have a dedicated person or a dedicated team only to validate backup and recovery.

Compared to other solutions, I would rate it a 10 out of 10.

We use it for disaster recovery. We use it for some testing. And we use it for hot backups on databases.

This past summer we had multiple hurricanes down south. We host for our clients, and what we did was proactively move them from their location down south up to our Boise data center in Idaho. We were able to do that with Zerto.

When you need to fail back or move workloads, Zerto decreases both the time it takes and the number of people involved. I was actually part of a project to move a data center, and we used Zerto to move it. We moved 20,000 virtual machines and the downtime was just a reboot of each machine. Before, it probably would have taken at least six people in multiple teams to do it, whereas in this move it was just two engineers from the same team who did it.

In addition, we recently had a corrupt database that we recovered using Zerto. If we didn't have Zerto, we would have had to do a restore and we would have had a loss of data of up to 24 hours, because the backups were done every 24 hours. In this case, we were able to roll the database back to a point in time that the DBAs deemed had good data. There was very little data loss as a result. Using Zerto in that situation saved us at least eight hours and from having to use multiple teams.

In that situation, for the recovery we would have done a restore from backup. The problem is we would have had X amount of hours of data loss. I don't know how long it would have taken the DBAs or our developers or app owners to reproduce the information that would have been lost. That could have ended up taking days. I've seen it take days in the past to recreate data that was lost as part of the recovery process.

Another point is that the solution has reduced the staff involved in overall backup and DR management. The big thing is that it reduces the teams involved. So rather than having the SAN team involved, the backup team involved, and the virtualization engineers, it ends up being just the virtualization engineers who do all the work. It has reduced the number of people involved from six to eight people down to a single engineer.

The most valuable features of this solution is the ease of use. In the event of a disaster, you don't need a technical person to actually run the software. You can bring anybody in, with the right instructions and credentials, and they can run the solution.

Having been in disaster situations myself, one of the things that a lot of companies miss is the fact that, during a test, it's all hands on deck, but during a disaster not all those hands are there. I don't know what the statistics are, but it's quite infrequent that you have the ability to get the technical people necessary to do technical stuff. I was also part of the post-9/11 disaster recovery review, and one of the key conversations was about situations where an organization had the solution in place but they didn't have the people. Their solutions were quite complex, whereas with Zerto you can do it with a mouse. You can do it with non-technical staff, as long as you have your documentation in proper order.

I've been doing disaster recovery for 20 years and, in my opinion, the solution's continuous protection is the best on the market. The ability to do the split-write, without any interruption to the production server, and the ability to roll back to any point in time you desire, are two really key features. The back-end technology, the split-write and the appliances, they've got that down very well.

There's room for improvement with the GUI. The interface ends up coming down to a personal preference thing and where you like to see things. It's like getting into a new car. You have to relearn where the gauges are.

I'd also like to see them go to an appliance-based solution, rather than our standing up a VM. While the GUI ends up depending on personal preference, the actual platform that the GUI is created on needs to go to an appliance base.

Another area for improvement I'd like to see is the tuning of the VRAs built into the GUI. It's a little cryptic. You really have to be a very technical engineer to get that deep into it. I'd like to see a little better interface that allows you to do that tuning yourself, rather than trying to get their engineer and your engineer together to do it.

I've been using Zerto for five years.

We had a rough start, but in defense of that, we were doing a lot of going long-distance with what we had.

The thing that I liked most about the problems that we had was that Zerto wasn't afraid to admit it. They also weren't afraid to put us in touch with the right staff on their side. It wasn't a big deal for me to talk to their developer. Normally, when you're at that level, the developers are shielded from customers, whereas with Zerto it was a more personal type of service that I got. We had a problem and they put me in touch with the developer who developed that piece of the solution and we brought it to resolution.

It's very scalable. We grew from just a few hundred to a few thousand pretty quickly, and there were very few hiccups during that process.

Out of the gate, when you call their number, they could do better. 

The thing is that I've developed such a good relationship with all of them, at all levels at Zerto, that I know who to call. If you're off the street and you call in, you're going to get that level-one support who's going to move you through it. When I call in, they put me right through to the level-two support and I move from there. It's like any support, if you know the right people, you can skip the helpdesk level and go right into the engineering.

The disaster recovery solution for the company I'm currently with was the typical restore from backups. They were using SAN replication as part of it. 

Personally, I've used many solutions over the years, starting with spinning tape, boot-from-disk, and then as we virtualized the data center, we started doing SAN-based replication. I've deployed and supported VMware Site Recovery Manager under different replication solutions, and then moved into Zerto. Prior to Zerto I used several different vendors' products.

Having been in disasters, living in Florida and experiencing them, I understand what it takes to recover a data center. I worked for my city in Florida and volunteered in the emergency operation center. Not only did I sit in technical meetings on how to recover computers, but I also sat in meetings on how to recover the city. So I have a different perspective when it comes to disaster recovery. I have a full view of how and what it takes to recover a city, as well as how and what it takes to recover a data center. Using that background, I pull them together.

As a result, I first look for a solution that works. That's key. If it doesn't work, it's out the door. The second factor is its ease of use. It has to be very easy to use, just a few clicks of the mouse and you're able to do a recovery. Zerto meets my requirements.

Not only was the initial setup simple, but upgrades actually work and backward compatibility during the upgrades work. I've been doing IT for 25 years and it's one of the few solutions that I have come across where backups work, not only doing the actual backup, but they're compatible with what you have in place. Upgrades are very impressive and very seamless.

I started with working with Zerto during the 4.5 version. Right after we deployed that we went to 5.0. The length of time really varies depending upon your engineering platform process. I did the PoC and all the documentation, and then I did the deployment into production. I spent a few days on the PoC because I needed to know what its performance impact was going to be on the host, on the VMs. Then I had to see what the replication impact was going to be as well. 

And documentation took me a couple of weeks. Because I've been in disasters, when I do documentation I do it so that I can hand it to anybody, literally, including—and I've done it—to the janitor. I've handed the documentation to the janitor and I've had them sit down and do a recovery. I'm picky on documentation. 

The actual sit-down at the keyboard to do the deployment, after everything was in place, including getting a service account, getting the VM deployed, etc., was quick. In one day we had it up and running.

I tend to do it myself because I'm old-school. I want to know how it works right from the ground up so that if I have to do any trouble shooting, I know where not to go to look at things. If you understand how something works, you can troubleshoot a lot faster.

I'm the lead architect, engineer, and troubleshooter. We have about four other people who are involved with it. We have several people because of our locations. We have more here, in the Idaho area, than we do in our other data center. We have one down in the southeast, hurricane area, of the United States. They're not expected to do a whole lot of disaster recovery, whereas we are.

I don't dive too much into the pricing side of things, but I'd like to see better tiering for Zerto's pricing. We do multi-tier VMs. I don't think I should be paying a penalty and price for a tier-three VM where I don't need a really tight SLA like I do for a tier-one.

Also, if we're looking to replace the data center backup solution, I have VMs that I may not need for a week in the event of a disaster. I'd like to see a backup price per VM, rather than the tier-one licensing that I currently pay for, per VM. I'd like to see better tiering in regards to the licensing.

We have Commvault, Cohesity, and Veeam. Veeam is probably the closest to Zerto for ease of use. The problem is that Veeam doesn't have the technical background of the split-write that Zerto has. Veeam can be very painful. It can't protect any VM in your infrastructure. Its process of doing snapshots is very painful. Whereas with Zerto, it doesn't matter how busy the VM is, it can protect it. Veeam does not do it that way, but its GUI is pretty easy to use. But again, if it doesn't work, it doesn't matter how easy it is.

Commvault and Cohesity are both complicated solutions. Cohesity is like Veem, it is snapshot technology. Its GUI is okay but it's a little cryptic and that's the thing that I don't like about it. With 25 years of doing IT, I can tell that the interface that Cohesity designed was done by Linux engineers. It's very kludgy with multiple clicks. You've got to know where to go. With Zerto, it's plain and it's simple to use.

Do your homework. Do a PoC. Make sure you have technical people doing your PoC, people who can dive deep into the technology. If you do your due diligence on the PoC, it will win every time. We did the PoC against five other products, and no one could touch Zerto on the technical side of it, at all, and that's besides the ease of use.

What I've learned from using it is to make sure you're able to tune the replication. Like any replication, if you're doing boot from stand or you're replicating your launch from place to place, you have to tune it. I was fortunate. I've been tuning replication for many years. If you're doing long distance, you have very high latency and you need to compensate for that. I worked with Zerto developers and we were able to tune replication to meet our site-to-site requirements. That was a key thing, and that's missed a lot of times. When people deploy the solution, they're not always keeping up with the SLA, and it has nothing to do with how it was deployed. It has to do with the pipe and the latency between site-to-site. That tends to be missed when deploying replication.

It is on our drawing board to look at Zerto for backups and long-term retention. I would say we're going to end up using it. It makes sense, at least from my standpoint, to keep things simple. It already has the data, so why not use it to move it wherever?

When it comes to the fact that it provides both backup and disaster recovery in one platform, I had never thought about the backup piece. When they announced it, it just made sense to me as an engineer with a logical mind. "Hey, I'm already holding the data, shoveling it across states. Instead of putting it here, why not put it over here at the same time?" So I was very excited about a two-for-one product. My company has backup solutions and they're struggling with them. I'm looking to replace their backup solutions with Zerto, probably in 2021.

We're also still looking at doing DR in the cloud rather than in a physical data center. We've done some testing with it. In my previous company we were using it and deployed it around the globe. Due to border restrictions, we had to go to the cloud with it. It was big because we were able to go to the cloud and we didn't have to stand up another data center. I'll be conservative and say that it saved us a few million dollars.

I give Zerto a nine out of 10. The only reason that I'm not giving it a 10 is that I'd like to see the GUI made into an appliance.

I am actually a value-added reseller. I personally do not use Zerto. I have customers that use Zerto, and they use it as their cyber recovery. They have also used it to move VMs.

When exactly a company can expect the benefits of Zerto depends on the use case scenario. In the instances I have seen with my customer, it has been both near and immediate-term benefits. Since it is easier for them to use and they are able to work with it and get their workloads done, they also saw benefits from a budget standpoint down the road.

The most valuable features in Zerto are ease of use number one and the support that has come from the Zerto team. They have been very hands-on with 'we are here to help you, train you and teach you how to fish, so you can drive it yourself.'

For us, the impact that Zerto has had on the IT resiliency strategy is that we use it as a way to help our customers set up data recovery should something happen. What we appreciate about it is the snapshot and how much easier it is to access.

The near synchronous replication works very well. This is not my experience. It is my customer's experience. They have been very happy with it. They had a bunch of VMs they wanted to move since they wanted to migrate some stuff, and it worked very well for them. It actually helped them beat their timeline as it worked so well. They were going to have a very, very, very hefty renewal that they had to pay. And so it saved them lots of money. It worked quickly and they were able to meet their timeline.

It's helped with DR testing. 

Better communication around pricing would be useful - particularly in light of the economic and tariff situation we have going on.

I have been using Zerto for three years.

We have not had any reports of instability in Zerto from clients. The use case I keep coming back to is our customer who used it to move a bunch of VMs. Once they got it up and deployed, they handily beat their schedule. At one point, they thought they were not going to get all the VMs moved and would have to do a renewal on part of them, however, the ease of use was so good with Zerto that they were able to migrate things much quicker.

Zerto's scalability has been good. One of the things that works for our customer set is what they call t-shirt sizing with extra small, small, medium, large, extra large and jumbo. Those are nice to have as a starting point to talk to a customer, however, then you can go in and tailor that specifically to the customer's needs.

I haven't had a need to contact Zerto's technical support.

Positive

I have used or sold alternatives to Zerto such as Veeam, Commvault, and Rubrik. Zerto is the clear winner.

I find that the initial deployment of Zerto for a client is quite easy. The instances where we rolled it out at customers, the deployment has gone very smoothly. There seems to be something intuitive about Zerto that makes it easier for folks in a company to use.

There's not really any maintenance needed once deployed. 

On average, four people are required for the deployment.

The pricing is competitive.

If I were to compare Zerto to its competitors, Zerto is the winner in data recovery.

I am not a technical person, so I cannot answer that from a technical standpoint regarding what Zerto does better or worse than its competitors. I can answer it from a customer ease of use perspective. The biggest thing we have heard is that it is easy to use and intuitive. The sales teams and technical resources that Zerto has are there to help answer questions and teach the customer how to use it in their environment, so they are able to do things after the Zerto resources are no longer there.

My clients have tried to protect the virtual machines in their environment. I have not seen any effects on RPOs or RTOs. I am an official reseller of Zerto.

On a scale from one to ten, I would rate Zerto overall a nine.

It was a pilot. We did a bake-off between Zerto and RP for VM, which was an EMC product. It was to fail over 130 Oracle databases.

We wanted to handle disaster recovery for our data center. Zerto was mainly a failover product. We did not use any security layering.

When we tested it, it had more functions than what we used it for, but it was a very good BCDR product. We liked the reliability and availability.

Zerto enables you to do disaster recovery (DR) in the cloud, but we did not use that feature. We used Zerto to help protect VMs in our environment. It was strong in that aspect. I would rate it an eight out of ten there.

Zerto's speed of recovery was comparable. There was no synchronous and asynchronous replication. If I had to give it a number, it would be a seven out of ten. It was the same as others. There was not much difference.

It was easy to migrate data. There was some initial configuration in syncing, but it was easy. I would rate it an eight out of ten in terms of the ease of migration.

Zerto’s ability to keep our users collaborating with one another during a data migration was good. I would rate it a seven out of ten in this aspect as well as in terms of its impact on RTOs.

Zerto helps reduce downtime in any situation. We can bring up a database in minutes. It probably takes five minutes for the final sync. The cost of downtime depends on the database. It may be 50,000 if you have call center people sitting around. Normally, most of our small outages like that ranged in the tens of thousands.

Zerto did save time in a data recovery situation. We did not have ransomware, but there were times we had database corruption where the users would corrupt the database, and the database would not start. It would do snapshotting. It was not necessarily ransomware, but it was testing upgrades or Oracle upgrades. The data recovery happened within five minutes, if not sooner. A normal restore would probably be four to eight hours if we had to restore from a tape and apply logs.

Zerto helps to reduce an organization's DR testing. You can spin off an extra database pretty quickly and have users test against the third or fourth copy. It saves one to three days of testing depending on test cycles. You could do sequential testing. I would probably measure it more in days than hours. All of that time can be used by a DBA to do something else.

Zerto reduces the number of staff involved in a data recovery situation. One person could probably orchestrate it now versus one to three people.

It did not reduce the number of staff involved in overall backup and DR management because we are pretty thin. We would not have gotten rid of anybody.

Zerto offered a very good front-end GUI for orchestration. The graphic interface was very good.

The replication layer can probably be improved.

We ran the pilot for about nine months. 

I would rate it a seven out of ten in terms of stability.

I would rate it a seven out of ten in terms of scalability.

In terms of our environment, we had 130 databases, 35 prods, and 2 data centers. In terms of end users, in our call centers, we had probably 10,000 users who accessed the databases.

They are good. 

Neutral

We used VMware SRM. We used Veritas clustering, which was a Veritas/Symantec product. We then went virtual, so we went from physical to virtual infrastructure, and we went from HP-UX to Red Hat infrastructure. Zerto was probably 50% easier than others.

Zerto has not replaced any backup solution.

It is a private cloud deployment. It is all VMware vSphere.

Its initial setup was straightforward. It was not as complicated as any other product. It took two to three weeks.

In terms of the implementation strategy, we wanted to reduce our synchronous synchronization. We wanted a better RTO, so we went to an asynchronous replication on private network infrastructure for faster syncing. There were a few technical aspects, but we took our time to lay out the network infrastructure.

In terms of maintenance, you have to patch it and upgrade it. We have a team of four for backup and storage.

Zerto helped us. They had very good staff. We got great support. I would rate them a seven out of ten.

We had two people working on that project, primary and secondary. We did use some of the networking team, maybe a half-person worth of time, because it is a little network intensive.

It is hard to measure an ROI. It is more like an insurance policy. You may or may not use your insurance policy, but it provides comfort to management. There may also be some soft cost.

It was a little higher. We were in a corporate agreement, and we had a software package that included RP for VM. It is easy to compare pricing when you are already in a corporate agreement. Zerto lost on the pricing scorecard.

We evaluated Zerto and RP for VM, which was an EMC product. They were different in replication logic and how they did journaling.

In Zerto, the replication is done through vSphere, and they did not license that product, so at any point, they could have probably lost it. We licensed RP for VM. We felt more comfortable with an EMC replication product because it was Dell and VMware combined or merged. The replication in Zerto was good, but it was using VMware hypervisor replication.

To those evaluating this solution, I would recommend doing an architectural design and implementing best practices. Involve your network team early and use Zerto's expertise.

I would rate Zerto an eight out of ten.

It's deployed on private cloud. I have two data centers, one in New Jersey, one in Ohio, which is my job site. I'm using a Zerto instance for my servers and another for my VDI machines. I can replicate everything.

When COVID started, everybody started to work from home and the internet connection to our New Jersey data center was saturated. But we had the same internet connection in Ohio, so why not use it? We needed to spread the load between data centers, so I used Zerto to failover 60 of our 175 users in New Jersey to Ohio, and they were able to work for nine months from Ohio. They were able to connect to their machines from home via Ohio, and it worked perfectly. Later, when we realized that the COVID situation would continue, we increased our internet connection to New Jersey and, using Zerto, I migrated all 60 users back. When COVID happened, Zerto saved the day. We didn't have to stop our business for a minute. It was seamless.

We also had problems, a few times, with SQL Server. That was pretty early on in our use of Zerto, and I used Zerto to recover it from our other site. We were on SQL on the other site for a week until they figured out what was going on and fixed everything. After that, I used Zerto and migrated back to New Jersey. That was a big save.

When I started with this company we used the Double-Take solution. It was very cumbersome and very difficult and we could only back up some servers. And when something happened, we could only have a limited number of people connect. When we started using Zerto, I was able to give every user a machine. Everybody could now log in to their machines and see all the applications, everything the same as it was before. People couldn't believe that was possible. To do it we created a fully virtualized environment.

In addition, we are a very heavily regulated organization because we're working under SEC guidelines. We have large institutional clients like Morgan Stanley and Goldman Sachs. For them, we have to prove our resilience and our ability to work in any situation. If we cannot do that, they will pull their money out. We run DR tests and we share the test results with them. Our clients want to see them. We couldn't do that without this solution. Zerto gives us the easiest and the most reliable way to do it. When we ran DR tests before we had Zerto, it was always very difficult. It would take almost a day to bring things back. With Zerto, I can have everything back in 15 minutes. In 15 minutes everyone can connect and start to work.

With our old solution, in a DR situation, we would need three system administrators working for hours before they got things to a point where a few people could start working again. And it took almost 24 hours to get everything back. And at the end of that time, we were exhausted. The first time we did it with Zerto, for practice, we clicked a couple of times and just sat back and watched.

It decreases the time it takes to recover and the number of people needed to do it. We were planning to hire a person who would be dedicated to our DR solution, before Zerto, because that was the only way we had found it could be done. When we installed Zerto for a DR test, we were surprised how easy it was to do it. When we hired another system administrator, because we had grown as a company, I gave him something like a half-hour lesson on how to use Zerto and he started to use it himself.

The continuous data protection is very important. Even if it's synchronous, right now we are at seven seconds difference, so we practically have all our data available, always.

Our old solution, Double-Take, required a lot of scripts and they were prone to mistakes. Zerto is so easy to use that when I showed it to my manager, he said jokingly, "Huh. I could use it myself, I don't need you." Zerto is most elegant. When I look at what's going inside Zerto, I see there is a ton of scripting but it's hidden from me. I just need to specify what I want to protect and where I want to protect it; very simple stuff. When they first brought in the solution, I saw what they were doing, how they were running all these commands, but again, I don't need to do any of that. If you do things right and you test it, it will just work with no issues at all. Nobody can come close to the elegance of Zerto.

I have been using Zerto since 2010 or 2011. We got Zerto when it was at version 1.2. They had just started.

I just upgraded to 9.0 U1. We ran our tests for IT a few days ago, because we made some network changes. And Zerto just worked perfectly.

From what I understand, if instead of 15 servers you need to protect 100 servers or 2,000 servers, if you properly plan everything it doesn't matter how many servers you have. To bring back 15 servers or 115, 15 VMs for 115 VMs, there is no difference. It will take the same amount of time.

Their technical support is great. When we have issues they work with us and troubleshoot until we figure out what is going on. I have no complaints. 

Initially, we used Double-Take on physical servers. We had five physical servers in our data center at that time. Later, we migrated all our servers from physical to virtual, using Compellent storage at the time. We were able to replicate our storage for DR, but it took a long time because there was a lot of manual work that was not scriptable. After that we found another solution, but it also required a lot of scripting and it was pretty cumbersome. It worked but it was pretty difficult.

Finally, Zerto came to us and we tried it. It was just day and night, a big difference between the previous solution and Zerto.

If you give me two Windows Servers, it will take less than 24 hours to replicate everything and you can already run a DR test. It's really amazing.

Initially with Zerto, every time there was an upgrade, I practically had to do everything from scratch. I had to recreate the groups and everything else. It didn't work well and I told them, "This is a big issue." In version 5, I believe, they resolved this and I could pick up my environment and restore it. When I upgraded my Zerto from version 8 to 9, it worked great and automatically. After half an hour I was running a brand new environment.

Every single penny we have invested in Zerto has been worth it. It has allowed us to grow our business and acquire more clients. Our clients are very happy with our DR solution. That's why they give us more money. For a company like ours, the more money we manage, the more revenue we have. From that perspective, Zerto has paid for itself 100 times.

It was a little bit expensive. It took a long time for us to get DR for our workstations. It's one thing when you have 15 servers, but when we needed to bring on almost another 200 users, and each was the same price as the servers, it was too expensive. But Zerto worked with us and gave us a solution that was pretty decent in terms of price. For my company, it was a good solution.

We bought those initial 200 licenses and we pay for maintenance every year, but it's stable. We don't have any issues. We get support, we can upgrade to a new version when we want, and they will support the changes on the ESX host.

I have looked at Commvault and HPE but I haven't found anything I like, so far, as much as Zerto.

Initially, when we looked at some of the other solutions, before Zerto, we were thinking that we would have a special person who would constantly build scripts. But Zerto is so simple that I  don't spend much time on this side of things anymore. My manager said, "I don't need to worry if you go on vacation because I can just open the console and click 'Failover,' and that's it. Everything will be done in the background." Zerto is an incredible solution.

It's not only about how much easier it is to install, set up, configure and, after that, run tests for DR. It also works. With previous solutions, DR tests failed a few times because they didn't work well or took too long. We would start a DR test at nine o'clock in the morning and we still couldn't bring things up until three in the afternoon. People couldn't wait that long. They hated those DR tests. Now, when we run DR tests at nine o'clock, everybody is back by 10 o'clock. We're really happy with this kind of scenario.

When we talk to other vendors I say to them, "Okay, you want me to try your solution. Can you promise me, when it comes to DR tests or real DR, that in 15 minutes I can start to use my DR system?" They ask me, "Who gives you this ability to run in 15 minutes?" I tell them, "Zerto. I've done DR tests with Zerto for many years, and within 15 minutes we are up and running." They are surprised.

The main thing to figure out before going with Zerto is, from a business point of view, what your company needs. What level of protection do you need? What regulations do you have to conform to? Can you survive with a seven-second difference in the data? Is 15 minutes enough or not?

Also, you need to take into consideration, from the licensing perspective, not only the Zerto licenses, but that you need to have a license for ESX, vCenter, hosts, and hardware. You need to count everything before you decide to go with Zerto. In our case, we're doing private cloud, and we needed to build that private cloud first. You have to decide if that is workable for you or you're okay using Azure or some other public cloud provider. Once you work through all that, Zerto will definitely be very good for you.

One issue we decided on, from a business perspective, was to divide our users into two groups: level one and level two. Level one users should be able to connect after 15 minutes and level-two users will be brought back after all level-one issues have been resolved, which should be within a couple of hours. When the business made that decision, we created the groups.

We're also working with Zerto as a ransomware backup solution. Right now we are using seven-day journaling but we're putting it on external storage or cloud. We're thinking about a one-year solution where we can go back to any particular point in time, bring the server back, and get all the files. We upgraded our version so we can start to use external storage. Zerto is one of the greatest applications we have for security and vigilance.

They did everything so well that I don't know how it can be improved. It's one of the best solutions among all the different components I have. I would rate most of the other solutions we're using between seven and nine out of 10. Only Zerto is a 10, along with my malware solution, Minerva Labs. Both companies are from Israel and I always grade both a 10 when I talk to others.

We use Zerto to enable our hot site configuration. We have two data centers. One of them is in one of our corporate buildings, which is our primary, and then we have a co-location center rack that we rent for our hot site backup or app. We use Zerto to replicate our servers and our VMs between those two sites. So, primarily, it is there in case of a disaster or malware attack, etc.

We also use it to restore files on the fly for users if they accidentally delete the wrong file or something like that. From a restoration standpoint, it is closer to the frontline of our security posture. We would first look to restore items. For removing the threat and everything like that, it obviously wouldn't be involved, but from a restoration standpoint, it would be frontline.

We have not yet used the cloud with Zerto. We just use on-prem physical servers. 

The primary focus of Zerto was to give us the ability to fail over in the event of a disaster. We've gotten pretty close to using it a couple of times, but fortunately, the disaster didn't quite hit us. So, there is the peace of mind to know that we can fail over at any time and keep our operations. We're spread out over a good chunk of the state of Nebraska, and if there is a disaster in one part of the state, our other branches will still be operating in the event of that disaster. So, our primary focus was just to get something that can keep our other branches running in case a disaster happens to a different branch or one of our data centers. So, that peace of mind is what we wanted out of it, IT-wise and management-wise.

It has improved our ability to restore files rather quickly. Previously, we had to use hard backups that we had to pull from nightly backup jobs, which used to take an hour or two, whereas now, we can restore them in minutes and get people working again. So, that's one clear metric that we've done in terms of improvement from the file restoration standpoint, but its primary focus is just a disaster recovery capability.

It provides continuous data protection very well. I have no complaints. It replicates, and we can easily maintain 10 to 15 seconds failover time and replication times. So, we can fail back rather quickly, and when we've done it, it works flawlessly.

When we need to fail back or move workloads, Zerto decreases the time it takes. In the times that I've restored back servers to previous points in time, usually, I'm doing upgrades on those servers in the evening or the middle of the night when nobody is using them. I basically restore those servers back myself. I get the replication process started again and the reverse protection done on my own without any help. I can fail it over and fail it back before the next business day. It is a very easy and one person's job.

It has helped in reducing downtime in those instances where server upgrades go wrong and we can just fail back the server to a previous state before we did the upgrade. It would save probably a good day's worth of downtime on that particular software. We have a server that runs all of our loan processing software. If the upgrade that went wrong broke that software, fixing it would have taken at least a day. So, by being able to restore back to a previous version, we saved the downtime that probably would have costed us thousands of dollars. There would also have been a lot of unhappy customers who couldn't get their loans. It would also have led to bad public relations and things like that.

The file restoration is very helpful. They've improved it over the years to make it a lot more user-friendly and easy to do, which I appreciate. So, we use that quite a bit. The failover process is quite simple and intuitive. Even the configuration and setup are pretty easy to do. It is pretty easy to use. I've done the restoration of servers several times, not as a disaster. When an upgrade on a server goes wrong and it messes things up, I can just fail back to a previous version and try it again. So, that has been really helpful.

It is very easy to use. By using their training materials and their site, it doesn't take long to get up to speed as to how the software works and how to configure it. Once you get into the process, it probably takes just four or five hours to get your sites up on-prem, at least for more simple configurations, and get the data replicating between different VPGs. So, it is very easy, all things considered.

We did look at the long-term retention backup feature of Zerto a few years ago, and at that time, it was limited. I can't say what it is right now, but at the time, its functionality was limited in terms of basically where we could save it and how we could save it. Offsite air gapping our backups is important to us to help protect against ransomware, and at the time, it couldn't do that. That would be one area that would be important before we consider using the long-term retention again. I haven't looked at it recently, and they may have addressed this in the meantime, but if not, this would be an area of improvement.

I have been using Zerto for about six years.

It seems pretty stable. We really haven't encountered any serious bugs or issues. It is doing its main job of replicating our servers. We can pretty much count on it to be there ready and waiting if something should happen. So, it has been pretty good.

We just use the on-prem version. So, as long as we have the capacity to keep up with it, I feel comfortable scaling it up. We don't have a lot of VMs. We probably have about 20 to 30 VMs. We don't push it too hard, but I feel pretty comfortable in growing our infrastructure. It will be able to grow with us.

We just use it on the 30 servers we have. We actually maintain IT infrastructure for two banks, and we have it at both banks in the same configuration with two individual VMware hosts that we replicated in between. We just do it on-prem at the moment. We probably will maintain that structure for the foreseeable future for the next couple of years. We may look into the cloud features a little later on to see what those can offer us. We will then also see moving our infrastructure into the cloud and seeing what we can do with that. 

In terms of users, we have an IT staff of seven. Probably four to five of them use Zerto in some fashion. Two to three of us maintain it and set it up and configure it. Others use it to restore files for users on help desk functions. So, at least 75% of our staff uses it on a regular basis. I'm pretty sure all of our staff have touched it at some point to pull reports, help users, fail servers over, or do things like that. 

I probably had to use their tech support three or four times over the past six years, and usually, they're pretty good after we supply them with the logs and the stuff that they need to get to the root cause of the issue and then getting it fixed. They're good. I would rate them a nine out of 10.

We used traditional backup with a software called vRanger back in the day before we got Zerto. I don't know if that software exists anymore. We basically use Zerto to do replication between sites. It is for quick and instant disaster recovery, but we still do the physical backups with Veeam. So, it has basically augmented our restoration capabilities rather than truly replacing our backup solution. It hasn't saved us any costs in managing our legacy solutions. Adding Veeam and Zerto together, I know we're paying more than what we paid before we added them or before we had either of them. The additional features are what we really wanted out of it, so the extra cost is worth it.

So, we use Zerto to give us a quick replication and file restoration ability, but we also use Veeam to do traditional physical backups that we can store offsite. If something happens to a server, we can quickly fall back on the replicated snapshot and restore the server quickly. We use the physical offsite backups with Veeam to store those on portable hard drives that we store in the vaults. So, there are air gaps so that ransomware can't get to them.

Zerto provides both backup and DR in one platform, but because we don't use Zerto's backup features, this feature is not super important for us at this time. We may look at that again to see how they've evolved that product over the past few years to see if it is more valuable to us, but as of now, it is not critical because we don't use it. In our eyes, Veeam and Zerto do two different things. So, we use both products to accomplish separate goals.

Zerto is easier to configure and set up than Veeam. Veeam can be a little tricky to make sure you have all the settings correct. From a restoration standpoint, they're probably both on par with each other. It is pretty easy to restore things in Veeam. It is just the initial configuration of getting everything lined up that is a little tougher.

It has been pretty straightforward. Initially, when we first got out of the gate with Zerto, we did have a third party to help us set it up, but we rebuilt it about a year later. We did that on our own, and it was surprisingly easy. It pretty much took a quick and free training course on their site. After that, I was up to enough speed to get it set up for us. It took four or five hours of training, and it was very easy. It took a day when I implemented it.

In terms of the implementation strategy, basically, we just wanted to get two sites set up, one on each data center. So, we set up two sites there with the appliances, and then we set up an individual VPG for each VM server. After that, we got them replicating. We set up our retention time and all that, and we were done.

For its deployment, there are two people at most. Usually, there is one. Zerto is easy enough to use, and one person can usually do whatever task is necessary to do in Zerto, whether it is setting up configuration or servers or restoring files. Usually, it is only a one-person job. If it is a more in-depth configuration, then you might need one more person for another pair of eyes to make sure everything looks right.

We initially had a third party to help us set it up, but now, we do it on our own. They are probably called The Integrators now. Our experience with them was not too bad. Once I learned how to set it up and how much work was involved and stuff like that, we probably overpaid for what it was at the time, but we weren't 100% familiar or comfortable with it at the time. So, it was a good experience. Obviously, they knew what they were doing, and they got it set up correctly. There was nothing wrong from a technical standpoint. Only the pricing standpoint was probably a little off but not too bad.

We have not done a return on investment. We aren't planning on doing one at this point. We know what we've got out of it, but we have not done a formal ROI.

Its licensing is yearly. You can do multi-year contracts, which is what we did. You pay per VM, and you replicate a license per VM. So, we bought about 20 licenses. We paid somewhere between $5,000 and $10,000.

There is an initial upfront cost. Basically, you buy the license, and then you have a maintenance cost on top of that. So, the upfront cost is somewhere between $5,000 to $10,000. The maintenance is $5,000 to $10,000 over a three-year period.

We did look at other options. VMware has a replication software capability as well. We did take a look at that. Zerto was an easier and cheaper solution to accomplish what we were looking for, and it has been pretty good.

It is a really good product for creating yourself a DR site that you can basically fire up in an instant. If you're looking for getting a hot site for your company and you are looking for something that in the event of a disaster or ransomware can quickly restore files for you, Zerto is a good product for that. I don't think it is terribly expensive for what it does, and it is really easy to use. I would definitely recommend Zerto if you're looking for a hot site setup.

We have not had to use it for ransomware yet. We've been fortunate. That was actually one of the reasons we did get it back in 2015. At the time, we were getting hit by ransomware.  We've invested heavily into security measures since then and haven't gotten hit with ransomware. So, we haven't had to use it for data recovery in situations due to ransomware, but it is a part of the incident response plan in case we do have to use it that way.

We do not use Zerto for long-term retention. We will probably evaluate the idea, but right now, we're pretty happy with the long-term retention product that we use. At this time, there is no firm commitment to switch over.

Zerto has not particularly reduced the number of staff involved in a data recovery situation. It has probably reduced the manhours required to maintain, but we're a Jack of all trades staff, so everybody has their hands in everything. So, it really hasn't reduced the number of staff, but it has reduced the overall hours of maintenance a little bit. It has also not reduced the number of staff involved in overall backup in DR management. There is still a decent amount of staff involved in the overall process, but the overall hours for maintenance have been reduced.

The biggest lesson that I have learned from using Zerto is that having a good DR configuration setup doesn't have to be a painful process. Zerto is a good software for just giving you that capability without you having to have a deep background and a lot of complicated software. The ability to restore and the ability to have a DR site on the fly is really valuable to our company. So, that's what we've been doing.

I would rate Zerto a nine out of 10.

We use it in our data center. We have two data centers, one in Baton Rouge and one in Las Vegas, and we use it for replication. It is all used in the data center.

We did not have replication previously. Once we got Zerto, we started seeing everything backed up and replicated, and we saw its benefits pretty early. Over the years, we have kept renewing Zerto because it seems to get better. There have not been any issues with it.

Near-synchronous replication works very well. We use pretty big storage with them and never had a problem. If it is close to going over, we always get an email, and it is easy to keep up with all that, which is pretty important here at Credit Union. I have nothing but positive to say about Zerto.

Zerto is easy to use. When we first started using it, we used the emails they sent at the end of the night to see everything was fine. About five years ago, they got their own portal. Since then, we have been able to see everything in real-time. It has been super easy. I automatically get notifications on my phone or email. That has been a real high point for me with them.

We have several VMs, and Zerto has been a part of the protection plan for them.

Knowing what is going on in real-time has helped with breaches and things like that. Recently, there have been no issues. Luckily, over the last year or two, we have not had any security issues. Zerto and VMware are what we count on in our data center. As long as the data center is up and running safely, we are good here at the branch.

We run reports on XDR and get an idea of anything that has been going on. Luckily, we have been safe for the last year or two, but in 2022, there was an issue. Zerto was right on it, and we were able to get it cleaned up. Zerto has definitely helped in the ransomware aspect.

The portal is a valuable feature. I am here in Baton Rouge, and I can get into the Vegas data center and see real-time replication on the portal. The portal has been upgraded over the past several years, and it is probably the most helpful part of it.

I always get some blowback about the cost. It does not seem too bad to me. We had to upgrade to a premium subscription to get some other features. Maybe a one-size-fits-all option would be better. 

I have used Zerto for eight to ten years.

I have not experienced any stability issues. We are a heavy usage bank, and it has always been steady for us. I do not have anything bad to say about that.

Scalability has been good too. We started with the one in Baton Rouge and added the one in Vegas about five years ago. It was very easy to connect them and get them mirroring each other. Scalability has been good for us.

When my staff member went to Vegas, there were some issues with logging into the device. He called the tech line and was able to talk to someone. We have had luck getting in touch with those guys. Their customer service deserves a good score, at least an eight out of ten.

Positive

At the previous bank, it was a big Cisco shop, but I have been here for almost ten years, and we have had Zerto for that long. Zerto is what I am used to.

I did not personally do the initial setup. A guy who works for me went to Vegas, called it in, and got it set up pretty well. I do not go to Vegas much, but I have been to Baton Rouge. I have tested it and played with it, and every time I have done that, it seems easy to use. My network administrator has never complained about any difficulty. For the most part, it is easy. They have a good tech support line, and if we have any trouble, they are easy to get in touch with. We are happy with that.

We have a maintenance contract with them, but I did not have to use it except for one instance a few years ago when we thought that we were going to get ransomware. We had maintenance on that. The good thing is that it is a part of the renewal. It is safe to have it, but luckily, we have not had to use it over the last few years.

Price-wise, it works fine for me, but my budgetary team is always looking for ways to cut costs, and it seems like they first look at the data center and the IT side to find savings.

Take advantage of the maintenance plan; even if it is not required, it is definitely worth getting. The techs there are really good. There are local Zerto reps who come around. Use the tech support when needed because they are always very good. 

I would rate Zerto a nine out of ten.

We have critical servers at remote sites that failover or are replicated to our main data center in case of an emergency. If a remote site has a failure, we can spin up that virtual machine from our data center.

We operate a hub and spoke design with a centralized data center hosting our main instance, reaching out to roughly 78 remote locations. We handle the VPGs through the centralized management console at our data center.

We also use the Zerto to replicate from a primary host to a secondary host in case the primary goes down; we have a kind of cold box to which the solution replicates.

Our final use case is if we are updating a plant's entire server rack, and we use Zerto to replicate the old servers onto the new ones, which results in less downtime.  

The product significantly decreased the time it takes to deploy new servers; we can work on them, build them, and then failover the old VMs to the new server with minimal business impact. What previously took hours to migrate the VMs with vMotion typically takes 30 minutes with Zerto, which is a phenomenal time saving for us. Our plants also have the reassurance that when we replicate their main servers back to a data center, we can keep their business running even if they have a total loss of a server rack or power.

The solution has helped to reduce downtime; we had a situation where a plant had its server fail, and we could failover their server to our data center and had them back up and running within 30 minutes. The required parts for a fix took three days to arrive, but thanks to Zerto, they did not have three days of downtime. Additionally, we just updated our hardware at our plants from HP servers to Dell, and we had to move 10 to 15 VMs per location from the old servers to the new ones. We completed this relatively significant move- roughly eight TB worth of data- in 30 to 45 minutes versus multiple hours, a remarkable reduction of potential downtime. Depending on the plant, downtime can cost $100/minute and potentially much higher if they are into online sales.   

The product helped to reduce our organization's DR testing; we previously used a Hitachi failover or manual VM move, but now we have Zerto VPGs at all sites. We can click the failover button, and it's done about 30 minutes later. It's good not to have to failover manually. Regarding time saved, we can get testing for a plant done in 30-45 minutes, resulting in between two and six hours' worth of savings.

The solution's most valuable aspect is allowing a failover from our remote sites to our data center. Our remote sites have failed several times, and on each occasion, we were able to bring a plant back online within 30 minutes, even though the hardware repair took many days.

The solution is very straightforward, especially after using it a few times. We had users who were daunted by it, but once we walked them through how easy it is to failover, they felt pretty comfortable. Zerto is easy to use and doesn't take long to learn, which is nice.  

We like the near-synchronous replication feature, and it's essential as we want to reduce the amount of data lost during a failover. The RPO and RTO are excellent, thanks to Zerto, and we have some sites with poor bandwidth, so we understand the limitations we're working with. Near-synchronous replication allows us to roll back to a specific hour or minute in case of a failure, which is a great feature.  

One of our primary uses for the solution is to protect VMs in our environment, which has an excellent effect on our RPOs. We had a data breach several years ago, and Zerto helped us quickly get back up. We like it a lot because we can failover within minutes once we detect an issue.  

I want to have an OVF or some local deployment where I can deploy the ZVRA rather than having to push it from the console. Some of our smaller remote sites have relatively poor bandwidth, and they can't keep up with the constant deployment stream from our center console, meaning we have to find some creative hours to get around the bandwidth bottlenecks. If I could push out a small install file, install it locally, and then reach back to the console, that would be excellent.

We've been using the solution for over five years. 

Zerto is very stable; we only have problems with sites with poor bandwidth, and there's little we can do to get around that. Sometimes VPGs get outdated because those sites can't copy the data fast enough, but the application is very stable.

The solution scales exceptionally well; we add more licenses when required and keep running. We currently have over 400 licenses.

I recently contacted technical support, and I rate them seven out of ten.

Neutral

We previously used Veeam, Commvault, and a Hitachi solution. We switched because Zerto has a better RTO and RP, and it's much easier to use than Veeam. The Hitachi solution was very cumbersome as it was CLI only, and we had to unmount and remount storage.

Comparing the ease of use with other solutions, Zerto is excellent; once we have the VPG, there's a large failover button which allows our entire team to carry out the function. It's elementary. After showing a team member once or twice, they can operate the tool independently. The graphics and GUI show us the failover progression, so we don't have to wonder if it has taken place or how long is left. The tool keeps good stats and informs us of the step it's on. 

I wasn't involved in the initial deployment, but we operate the solution with one team, our server team. Regarding maintenance, a minimal amount is required to keep up to date with patches etc. We occasionally run into an issue that necessitates upgrading to a newer version; for example, we were trying to move some vast data stores, and Zerto support said we needed to increase the timeout count. We keep fully up to date with security patches, and two staff members are responsible for maintenance. 

We have seen an ROI with Zerto, though it's hard to quantify precisely how much. It saved us a significant amount of downtime, and plants lose money when they're down, so it's a hidden ROI in that respect.

As far as I know, the pricing is around $1,000 per VM, but Zerto is changing the pricing model to more of an enterprise-class license. I don't know if there are any additional costs or fees.

I rate the solution nine out of ten. 

Zerto did not reduce the number of staff involved in data recovery, overall backup, and DR management because we already run a very lean staff; there are eight of us on the server team, and we manage over 3000 servers across the company. On the other hand, Zerto enables multiple staff to do the failovers rather than one of two specialized employees. 

None of the time saved in DR testing has been allocated to value-add tasks because the time saved occurs outside our regular business hours.

Comparing the solution's speed of recovery with other disaster recovery tools, Zerto is excellent and rapid; we can restore everything in the VPG simultaneously. A tool like Commvault is single-threaded, so we would have to restore VM by VM, which is very limiting. VPGs are excellent because we can restore everything within them and get on with life.  

We have not used the tool for immutable data copies; we use our pure storage.

When we had a ransomware attack, the solution didn't initially save us time as they attacked our Zerto environment and took it down. Once we had it back online, we could speed up the recovery, and we've since hardened the product with additional security.