ManageEngine NetFlow Analyzer vs Plixer Scrutinizer comparison

"I give this solution a rating of 10 out of 10 and absolutely recommend it based on our experience."

"ManageEngine NetFlow Analyzer has detection capabilities for flow, event, and service flow."

"Visualization of the network traffic is the most valuable feature. It allows you to drill into information quite quickly."

"We have had many requests to understand in the network which devices are connected to others. Most people don't have this information or are able to establish a map of data flow everywhere around the network. Scrutinizer can really help with this. We are using it to understand who is talking to what, how, and which protocols can help us to improve security and analyze flow."

"The ability to view the status of the top-10 at a glance is helpful. We immediately know which link is over-utilized or heavily used... and it's all in real-time."

"It helps us determine what is going on with our Internet and who is hogging it all up. If we get a real high throughput or a throughput that's going over and getting dropped fairly quickly, we can tell who (or what device) is consuming that traffic."

"The reporting and generating troubleshooting reports would be the best feature; our host-to-host conversation reporting."

"The solution helps to enrich the data context of our network traffic. It allows me to see what applications are most in use on a slightly historical basis, going back a day or week at tops. It allows me to tune QoS or traffic shaping around what's being used. It saves me from having to unnecessarily upgrade, if I don't need to."

"As a network engineer, the ability to identify what traffic on the link is consuming all the bandwidth at any given time, and provide immediate feedback to the business, is the most valuable feature."

"It shows us the saturation of the network of devices. It gives us a clear view of the flows in the network to understand, for instance, planning upgrades in the network to get an idea of what's going on the network on traffic flows. It gives us insight, for instance, on what's going on on our VPN Client. There are a lot of things where it provides very helpful information. It also gives us our security reports with quite detailed information on what's going on in the network, and whether there are data exfiltrations and so on."

"In ManageEngine NetFlow Analyzer, we have to set custom thresholds to get alerted if there is a problem in network connectivity. It would be helpful if we could automate the tool such that we don't have to set thresholds manually, and the tool automatically alerts us when it detects issues."

"Though Plixer Scrutinizer has network detection and response, it's an area that needs just a little more rounding out. Another room for improvement in the solution is its lack of SaaS offering which some customers were looking for. My company deals in small to medium businesses, mid-market, and some customers wanted the SaaS feature which Plixer Scrutinizer doesn't offer. What I'd like to see in the next release of the solution is for it to have a SaaS offering because my company also deals with educational spaces and smaller businesses that just don't have the staff that can implement this. If there's either a managed service or SaaS-based offering to just make it a little easier for those types of customers, it would be a great addition to Plixer Scrutinizer."

"I wish the reporting side was easier to work with, but it does a decent job. I also wish the reporting side was a little more intuitive or they offered more reporting examples."

"The reporting structure, the front-end GUI, also needs some work. It needs some getting used to. It works fairly well, but it's a technical tool rather than a user tool. You have to understand the structure of the databases before you can really use it."

"Data retention needs improvement. Data retention is a thing where we are looking for a better way to collect flow data for a longer time to do forensic research on security incidents. By default, data retention is quite low. We need detailed data in safe storage for a longer time, e.g., for a couple of months. An improvement would be a way to export data into a secure long-term storage."

"It would be useful if there was a way to back up the configuration information. E.g., if you wanted to deploy a new instance or disaster recovery, you could quite easily deploy and restore the config, as opposed to having to restore all the NetFlow data. If there was just a button that said "backup config information", that would be good."

"They're working on the security areas, so it can provide more insight. What they have is still pretty much IP-concentric. If they were to make it IP and URL, they'd be a little bit ahead on that."

"The solution creates a visual map of a particular location and how the network flows. You need to spend time to generate all those maps. If they could figure out a way to reduce the time needed to generate the maps, that would be great."

"We couldn't get it set up properly."

"There is a recurring maintenance fee after the initial purchase or if we want the license upgrade."

"We have increased the license over time. We have added more licenses as the network has grown."

"We recently bought a license upgrade, so we will integrate more exporters. We upgraded from a 25 exporter license to a 50 exporter license. Therefore, there will be more flows, and this will be an extension. I don't know when we will purchase a faster server, because the server that we have is quite new."

"We pay our one-off cost for the licenses, per device, in blocks of 50. And then we pay an annual maintenance fee of about $15,000 Australian, which is, at this point in time, about $9,000 US, for those 250 devices. The upfront costs for the 250-license use, were about $50,000 Australian, which is about $32,000 US."

"It's about €10,000 a year for initial license and yearly maintenance costs. In addition, the hardware costs are about €10,000 once every five years."

"The licensing cost for Plixer Scrutinizer is in the middle. It's not the cheapest, but it's not the most expensive. Its licensing model is based on how many exporters, how many devices export information to the system. Plixer Scrutinizer has different modules you could add such as the security module which would cost extra."

"We just renewed. The pricing is 5,000 euro per year. This is the final price. All tax (20 percent) is included."

"Currently, the license for Plixer Scrutinizer is subscription-based and at a yearly fee. The price would depend on the amount of traffic you pull in. For example, there are several blocks from a 10K flow, a 40K flow, and a 100K flow, and based on the number of devices that you receive the flows from, that's the license, and it is not a per-interface pricing model, so that is a very strong, very competitive pricing feature of Plixer Scrutinizer. Licensing for the product is also not based on the number of storage, compared to some competing products that are priced based on the amount of storage you need, particularly based on the retention and the amount of data. Plixer Scrutinizer licensing is based on the device, and it's more in the direction of $10,000 because, with just $1,000, you don't have anything."