No more typing reviews! Try our Samantha, our new voice AI agent.

Kentik vs OmniPeek comparison

Why PeerSpot?
 

Comparison Buyer's Guide

Executive SummaryUpdated on Jun 3, 2026

Review summaries and opinions

We asked business professionals to review the solutions they use. Here are some excerpts of what they said:
 

Categories and Ranking

Kentik
Ranking in Network Monitoring Software
13th
Average Rating
9.0
Reviews Sentiment
6.7
Number of Reviews
22
Ranking in other categories
Distributed Denial-of-Service (DDoS) Protection (10th)
OmniPeek
Ranking in Network Monitoring Software
51st
Average Rating
7.8
Reviews Sentiment
6.0
Number of Reviews
8
Ranking in other categories
Application Performance Monitoring (APM) and Observability (38th)
 

Mindshare comparison

As of November 2026, in the Network Monitoring Software category, the mindshare of Kentik is 1.5%, up from 0.8% compared to the previous year. The mindshare of OmniPeek is 0.6%, up from 0.5% compared to the previous year. It is calculated based on PeerSpot user engagement data.
Network Monitoring Software Mindshare Distribution
ProductMindshare (%)
Kentik1.5%
OmniPeek0.6%
Other97.9%
Network Monitoring Software
 

Featured Reviews

Gcecilio - PeerSpot reviewer
Network Engineer at a media company with 51-200 employees
Traffic insights have reduced transit costs and support secure, direct connections with providers
The best features that Kentik offers are the ability to identify traffic end-to-end and to know which transit is used, if it goes through any other transit, to see the entire flow, from the subscriber to the content provider and vice versa, from the content provider to the subscriber.I can also determine whether it is symmetric or asymmetric traffic, and if it goes through any provider that has some kind of bottleneck. That is very important. Regarding the security part, which is also possible to handle through Kentik, you can configure it in a way that makes the network more secure and reduces the amount of dirty traffic or attacks received. Kentik has had a high positive impact on my organization. Besides the cost reduction, it has been possible to perform troubleshooting more effectively, and also regarding DDoS-related attacks. In addition to cost reduction, we had a more reliable connection. Since the moment we identified that it was possible to have a direct connection with content providers like CDN77, Cloudflare, and Akamai, we established a direct connection there through a PNI with these content providers, making the network less dependent on an IP transit provider.
Vinal-Patel - PeerSpot reviewer
Network Architect, internally known as Network Transformation Lead at a pharma/biotech company with 10,001+ employees
Real-time analytics and alerts improve application performance and network operations
OmniPeek's ability to convert application visibility into flow helps me quickly understand application performance over LAN, WAN, or wireless. Its real-time analytics, integrated with LiveNX, allow me to monitor business-critical applications and set up alerts for application performance issues. This centralized dashboard and alert system is highly valuable for maintaining network operations.

Quotes from Members

We asked business professionals to review the solutions they use. Here are some excerpts of what they said:
 

Pros

"In terms of overall vendor partnership, I'd give Kentik a nine out of 10; they're right up there as one of my best partners to work with, amongst all the contracts that I own, and they're very customer-centric, always available, with nothing too small or too big that I can't ask them to help with, and they seem to be willing and able to jump in no matter what."
"I can say that I am so happy with this platform because it is very useful for us."
"Overall, the ease of use and the fact that it meets client expectations are major positives."
"Monitoring operational efficiency is easy."
"The most valuable features have been anything around traffic engineering: being able to determine the source or destination of a surge of traffic, whether it's DDoS-related, or a customer just happened to have a sudden uptick in traffic. Being able to tell where that's coming from or where it's going to enables us to do things based on that."
"Having the API access allows us to do a great deal of automation around a lot of our reporting and management tools."
"Kentik has positively impacted my organization significantly, as it serves as our main monitoring system."
"Honestly, it is one of those products that I would suggest to almost any network operator."
"The most valuable features are the voice bot, which checks the quality of service for voice, and the expert view that gives me insight on what and where to troubleshoot."
"It's a solid piece of software. It's stable."
"OmniPeek shows the entire packet flow and structure, particularly in security-related scenarios, whereas Wireshark sometimes fails to capture all packets."
"OmniPeek's ability to convert application visibility into flow helps me quickly understand application performance over LAN, WAN, or wireless."
"OmniPeek is a good product, but you should know its purpose for your organization."
"I believe the most crucial feature of OmniPeek search is the ability to sniff packets based on channel switching."
"The most valuable feature of OmniPeek is the ability to assign custom color codes to the different packets easily."
"The most valuable feature of OmniPeek was the ability it gave us to see the connection procedure."
 

Cons

"There is room for improvement around the usability of the API. It's a hugely complex task to call it and you need a lot of backing to be able to do it. I should say, as someone who's not in networking, maybe it's easier for people who are in networking, but for me that one part is not very user-friendly."
"Perhaps a better explanation would be to see how tagging is captured and a method of comparing my tagged interfaces on Kentik’s side."
"Sometimes, the tool has complications, so we must deal with the additional support from the tool's end."
"It also detects anomalies proactively, but the same is not so true when it comes to real network problems, since they tend to just happen."
"Kentik can be improved by enhancing the alerting system, especially the way templates work and the hierarchy of these alerts."
"We had faced some issues during an outage and were not able to get the desired results from Kentik tools. It took time to resolve these issues, which is why I give them eight points."
"My experience with pricing, setup costs, and licensing shows that the prices are quite high."
"There is a large difference between BGP and normal nodes. I don't think this plays out to the best for the customer or Kentik."
"I am not using OmniPeek for automation, we only do manual testing. Automation testing is tedious to do. The automation should be more user-friendly. I have exposed some APIs but the usage is not user-friendly."
"Making it more clear on how to configure the filters, or really automating them, would be an improvement."
"Centralized management of configurations needs improvement."
"Sometimes setting up the filters for the product is difficult, and I can't quickly sharpen them from the home screen."
"I would like to see the tool work in an open environment the same as how it does in a closed environment."
"I would like to see the saving feature improved. We have had issues if you do not save your progress then you have to start from the beginning."
"The solution's automation has room for improvement."
"I don't see a clear roadmap in the future for improving this software."
 

Pricing and Cost Advice

"We have an annual contract with Kentik that we renew each year for a set number of licenses. We also have some burstable licenses which we can spin up and spin down, and those are paid as they are used."
"The tool is cheaply priced."
"The pricing for this solution could be improved, as it is a very expensive product."
"We have only purchased the add-on once and have not paid for any subsequent versions as it was too costly for us."
"There are different types of licenses available."
report
Use our free recommendation engine to learn which Network Monitoring Software solutions are best for your needs.
920,929 professionals have used our research since 2012.
 

Top Industries

By visitors reading reviews
Comms Service Provider
15%
Financial Services Firm
12%
Media Company
9%
Construction Company
8%
Comms Service Provider
16%
Manufacturing Company
10%
Construction Company
8%
Healthcare Company
7%
 

Company Size

By reviewers
Large Enterprise
Midsize Enterprise
Small Business
By reviewers
Company SizeCount
Small Business7
Midsize Enterprise4
Large Enterprise10
By reviewers
Company SizeCount
Midsize Enterprise1
Large Enterprise7
 

Questions from the Community

What is your experience regarding pricing and costs for Kentik?
My experience with pricing, setup costs, and licensing has been limited because I was not responsible for that in my company, but I have spoken with my boss, and he reported that the licensing mode...
What needs improvement with Kentik?
Kentik can be improved by enhancing the alerting system, especially the way templates work and the hierarchy of these alerts.
What is your primary use case for Kentik?
My main use case for Kentik is as a network monitoring system and flow analysis tool. A specific example of how I use Kentik for network monitoring is monitoring devices or services that go down an...
What needs improvement with OmniPeek?
There isn't anything specific that needs improvement in OmniPeek, as it performs better than Wireshark for our requirements. However, OmniPeek could benefit from supporting different platforms. Pla...
What is your primary use case for OmniPeek?
I have been working with the OmniPeek product for almost two years at the start of my career, primarily using it for wireless 802.11 Wi-Fi packets, sniffer, and analysis. My experience with OmniPee...
What advice do you have for others considering OmniPeek?
I didn't explore much about OmniPeek beyond its basic features. OmniPeek is user-friendly and easy to start working with, especially on the Windows platform. For beginners, it is very easy to handl...
 

Comparisons

 

Also Known As

No data available
Savvius OmniPeek
 

Overview

 

Sample Customers

Pandora, Yelp, Neustar, Box, University of Washington, Zoom, Tata, and Cogent. 
Apcon, Aruba Networks, Avaya Inc., Cisco Systems, Ekahau, Gigamon Systems, HP, IBM, IXIA, Meru Networks, Napatech, NextComputing, Procera Networks, Qualcomm Atheros, Ralink Technology Corporation, Telchemy
Find out what your peers are saying about Kentik vs. OmniPeek and other solutions. Updated: November 2026.
920,929 professionals have used our research since 2012.