In the industry, there are currently blade solutions from Dell, HP, Lenovo, and Cisco. Compared to those, all blade solutions are similar in design. In the chassis, there is a back panel where each blade has a card module that plugs into the blade chassis. The chassis contains a network switch as well as a SAN switch. The SAN switch and network switch combined to the blade module provide plug-and-play functionality. The throughput is also good. Dell PowerEdge MX- Series currently has two types of processors with speeds of 2.1 and 2.3 GHz, possibly 2.2 GHz as well. All applications in our environment run on these processors. However, I think the processor speed should be higher because the coming applications are all AI-based and require more powerful processing. As of now, there is no issue with the current processor clock speed for our running applications. They are all Gold processors. In our environment, we have designed a setup with Dell PowerEdge MX- Series chassis with two network switches in the back panel. The two network switches connect to the main upstream network switch with link aggregation protocol (LACP) bonding. Currently, 160 gig, 40, 40, 80, and 80 gig bandwidth is running. The throughput is 80 gig total. Each blade server has a 20 gig network connection and will get a maximum of 20 gig network bandwidth, while the total chassis will deliver a maximum of 80 gig bandwidth. However, it can go up to 160 gig because the upstream network switch supports QSFP+ modules that are 40 gig each, with two 40 gig connections totaling 80 gig. Dell PowerEdge MX- Series also includes a SAN switch. The SAN switch is in the back panel of the chassis and connects to our main central SAN switch, which is connected to central storage. It is easy to onboard our central storage to the blade server as required, and there is no issue with that. The benefits include the fact that Dell PowerEdge MX- Series blade servers have sixteen blade servers in a single chassis, which consumes minimal space in the rack and data center, as well as requiring minimal cabling. For cabling, there are only four network cables connected to the main upstream switch. When connected to the SAN switch, there are only four additional cables, totaling eight cables to the SAN switch. This results in no messy cables in the data center. Additionally, the performance is good enough based on our current applications running on the servers.