HPE SimpliVity Reviews

It is easy to use. 

HPE SimpliVity should cost less. 

I have been using this solution for two years. 

HPE SimpliVity is stable. 

HPE SimpliVity is scalable. Some 200 people at my organization are using this solution at present. 

Our experience with technical support has been good. 

It is very easy to use this product. 

It is used for managing the infrastructure. It is combined with VMware software. We are using HPE SimpliVity Generation 10.

The compression and deduplication features are most valuable because they allow us to have a small footprint for storage. It is a very stable product, and we are also able to get all that we need in terms of reporting.

They should optimize the administration stack because it is consuming too much memory. It ends up consuming 20% of memory. They have another product for this feature, but I would like to have this feature within HPE SimpliVity.

I have been using this solution for two years.

It is a very stable product.

It is scalable. Everybody in our organization is using this solution because internally, all our applications are running on it. We have around 50 users and 5 administrators.

We were using HPE BladeSystem.

We worked with a provider, and he installed it.

It is not expensive. We bought its license for two years. For support, we pay yearly.

I would recommend this solution. We plan to keep using it.

I would rate HPE SimpliVity an eight out of ten.

This solution is for general purpose utilization. We are partners with HPE and I'm a system engineer.

The improvement to the company has been in terms of data reduction, we're storing more data with a lower footprint.

The compression and deduplication ratio would be the most valuable features. 

I'd like to see some improvements in terms of simplifying deployment and making it more user friendly. I think the technical support could be improved as well.

I've been using this solution for two years. 

With the newer models we can scale as we need. There are 20 users in our office and probably 200 more worldwide. 

We've carried out this deployment numerous times so it's not an issue. We're able to carry out the physical implementation in two or three hours. Project management and related work takes about two to three weeks. 

The licensing price is okay, there would be extra costs for replication licenses, for RapidDR but nothing on top of that. 

It's important to use the best solution for your requirements and use case. 

I rate this solution an eight out of 10. 

Our clients' primary use for HPE SimpliVity has been for general infrastructure, not for any one specific thing. This includes different uses - for the server, SQL, the internal information server, different servers, etc.

The backup solution is a good functionality that the client is very happy with.

In terms of HPE SimpliVity's most valuable features, its backup integration is a good thing. Its performance is very good as is the whole integration.

In terms of what should be improved, I think that the local support in Argentina is not good. This is a new technology and HPE doesn't have a lot of technology specialists here in Argentina. It's very hard to find the specialist here.

Additionally, the price must be better. Here in Argentina, Dell is very competitive. If the client doesn't understand the functionality that SimpliVity has, he will chose by price, and Dell is very, very competitive here in Argentina.

Lastly, Stretched Cluster is a new functionality and is something that the client needs.

We have been using HPE SimpliVity for two to three years.

The stability is very good. Stability is not a problem.

Our clients are small and medium-sized businesses, so we implement small infrastructures - three nodes to five nodes.

Our clients are very happy with this solution. I don't know if they will buy more SimpliVity though.

Here in Argentina tech support is very hard to find. But, if we scale our problem with external support in, say, the United States or another country, it's good. Here in Argentina, though, it's not good.

Initial setup is very simple. It takes one or two days.

Dell is a competitor, as is Nutanix.

Dell is a good solution and is cheaper than HPE, but their support is bad here in Argentina too. We've found that the client likes HPE because he knows it.

For now Nutanix is still very small here in Argentina.

We recommend our clients use SimpliVity.

On a scale of one to ten, I would give HPE SimpliVity a nine.

We use the solution for HCM, secondary distribution endpoints, file sharing, domain controller, all many kinds of applications.

I find the replication feature valuable.

There are a lot of different components to choose from in the chassis. This could be easier by providing a standard or a base model to create and configure from. 

I have been using the solution for a couple of years.

I believe the solution is stable, I did not see any issues.

The solution is converging in a public place, the scalability is good. We have approximately 70 users using the solution in my company,

We previously used Dell PowerEdge rack servers.

I found the installation straightforward. However, I am not sure about others.

The solution took a couple of hours to do the implementation with two technicians, and we have one technician for the maintenance. Next time I am going to use a consultant or a supplier to do the implementation.

The product is expensive.

We are going to continue to use the solution in the future, and I recommend it to others.

I rate HPE SimpliVity a nine out of ten.

The product is a hyper-converged solution. We are using this for local databases and application settings.

It's a normal solution and offers all of the typical features of a typical production on the market.

The pricing of the solution is very good.

The solution offers good stability.

There's nothing overly special or unique about the solution.

Overall, SimpliVity has a lot of features, however, those features need to be more precise. It's like a jack of all trades and master of none. It needs to hone in on a few features and really make them shine.

SimpliVity claims to have what you call a compression and dedup ratio, however, in practice, it doesn't really work.

They need to give more controls and more features as far as the backup is concerned.

The initial setup is not that easy.

The licensing could be more clear.

The technical support isn't ideal right now.

I've been using the solution for two years at this point.

The solution is quite stable, however, there's a lot of dependability on VMware. It interfaces a lot with it. Therefore, if there are any changes in VMware, it has to be reflected on SimpliVity as well.

We have not really tried to expand the product, due to the fact that we don't really want to invest more into it. Therefore, I can't really speak to the solution's capabilities in this matter. We're just going to use it and maybe over a period of time, we might just come out of it.

When we had purchased SimpliVity, it was a stand-alone product. Then, HPE acquired SimpliVity. Therefore, whatever support that is there, it is not really the complete, comprehensive support that you would experience with other HPE products. Basically, since this is an acquired system, there are limitations when it comes to support.

We're just customers. We aren't resellers or consultants.

The initial setup is not straightforward. It's fairly complex.

The deployment didn't take too long, however, It was done in about a week or so.

In terms of recommending the product, it depends on what a company needs and it depends on what they want it for. It's a solution-driven implementation. What didn't really work for me, might work for someone else. 

I'm not sure if HPE is very keen on SimpliVity, as I don't really see them promoting this product very much. I'm curious to see if they'll continue with it or not.

Overall, I would rate the solution at a five out of ten.

Our solution is on a perpetual license. The pricing itself is okay. It's not too expensive.

There's a bit of confusion around licensing. Initially, SimpliVity did not talk about licensing for the software. However, later on, when the customers tried to update it, then SimpliVity said that they would have to pay for the update. Ideally, HPE should be very transparent about pricing and the licensing of this particular solution. It's not right now.

We primarily use the solution for the virtualization and the hyper-converged solutions in the software backup and recovery as well as the high data reduction rate.

The solution is very stable.

The installation is easy and the deployment is quick.

The configuration is pretty easy. It's a pretty out-of-the-box solution and comes mostly pre-configured for you.

The solution needs to improve the high data availability.

The backup and recovery process needs to be faster. Right now, it's a bit slow.

There needs to be more customization capabilities available for customers. That's lacking and clients would really like it if they could better customize the product to better fit their needs.

While the company has worked with the solution for about two years at this point, I'm a newer member of the team and don't have quite the same level of experience.

Our organization has found that the stability of the product is quite good. It's reliable. There aren't bugs or glitches. It doesn't crash or freeze. It's been good.

We have about five different customers who are utilizing the solution currently.

The technical support is quite good. We're satisfied with the level of service provided. They are knowledgeable and responsive.

The installation was very straightforward. We didn't find it overly complex. We didn't run into any difficulties in the implementation process.

The deployment was fast and only took about two or three days or so.

We're a solutions integrator and therefore we are able to implement the solution ourselves. We don't need the assistance of consultants. 

There are licensing costs involved as virtualization comes pre-packaged in the solution.

Our organization is using the latest version of the solution.

We're both integrators and implementors. 

I would recommend the solution to other organizations. It's so far worked well for us and our clients.

Overall, I would rate the product at a nine on a scale from one to ten.

We are using this solution for a VDI system.

HPE SimpliVity can improve our DR solution.

I would recommend this for the Hospitality industry because of the data recovery. I think that HPE SimpliVity is the answer.

The most valuable feature is high availability.

We haven't really explored all areas of this solution we are still in the POC phase.

Pricing and monitoring could be improved.

I think that they should have their own hyper-converged system.

I started using HPE SimpliVity approximately two months ago.

It's a stable solution. We have not had any issues with stability.

This solution is scalable. You can add additional nodes at any time. It's easier to scale than Cisco Hyperflex and better than Nutanix.

Technical support is excellent.

Previously, we did not use another solution.

SimpliVity is the first HCI that we have implemented in this company. We have learned and gained more experience in this area.

The initial setup was simple. It took one week to deploy.

We did not deploy this solution ourselves, we used a system provider.

The hardware is expensive. For the same price, Cisco can provide more hardware specifications for us.

The hardware costs are more of an issue than the licensing costs.

We also evaluated Nutanix.

Nutanix is quite expensive. It's at least two times more expensive than SimpliVity.

This is a product that I would recommend to others who are interested in using it.

I would rate this solution a seven out of ten.