HPE ProLiant DL Servers Reviews

Our primary use case is as our domain controller and file services, our local CR applications, and our ERP, local ERP. The main service we're using is the local ERP with Oracle DB.

Technical support is helpful.

It's very easy to set up.

The product has a more flexible infrastructure and management consultation in comparison to Dell.

It's energy-efficient. It's consumed less energy than the previous solution and the performance is great.

We'd like the solution to be more energy efficient so that we need less cooling or less dependence on a cooling system. 

Its management console could be better. There should be some tools and tips added so that, if a beginner's level goes for management, you can easily find tools and tips, and help them manage everything in case of emergency before going to technical support from HP.

We've used the solution for a year. We started using it last March.

The on-premises version is quite stable. The performance is good. There are no bugs or glitches. It doesn't crash or freeze. In the time we've used it, it has been issue-free.

It's easily scalable and you can expand it pretty well.

We are 48 in-house users, and our remote users are more than 200.

Technical support is very cooperative and helpful. 

We have a contract where they can give us support. Within the next 30 minutes, they will respond, for HP and for VMware as well. With VMware, we can get support online and from a remote desktop or remote services. They will always provide us support for hardware and technical support from HP, which we have contracted. The largest delay we deal with is the next business day, however, typically, they come to us within 30 minutes to one hour time.

We replaced Dell with this solution as Dell is no longer present in our country. While we were satisfied with Dell, we had to replace it. There are only a few Dell vendors left however they aren't so good in terms of support anymore now that they aren't in the country.

The initial setup is straightforward. It's not overly complex or difficult. 

Our deployment took less than 15 days. 

Setup assistance was provided by HP as well as VMware. They moved our VM from the old infrastructure to the new one.

In terms of ROI, for what we have invested in it, we are getting the same amount out. 

We purchased the license for HP with technical support included.

We have a three-year license that we pay for yearly.

It is affordable. After three years, we are going to have SLA with them, like the way we previously had with Dell.

I'm just a customer and an end-user.

We are using the on-prem version of the solution as the connectivity is not very stable. We cannot afford a cloud solution.

We have a service contract with VMware and HP as well for support.

I'd rate the solution eight out of ten.

We do work for defense and government clients. 

ProLiant servers are more reliable than other platforms.

My customers are tilted toward GPU users, and the mixed version of the enabled hard drives require — flash drives, SSD, NNL, and PLAS — all mixed and matched in a single box. These are requirements I've already shared with the HPE account manager. 

Customers want the tiering concept inside a box, which is currently part of the storage system, but customers require it in a server. They want the operating system over PLAS and the IO-related things on SSD.  The rest of their data is on NLSF. 

I've worked with ProLiant servers for 10 years. 

Stability is where HPE dominates competitors like Dell and Cisco. The servers are highly reliable, and we are impressed with the technology HPE offers.

Scalability in terms of GPUs and storage is a concern. 

I have a direct connection with the HPE account manager responsible for the government and defense verticals. I am happy with the person. We rely on our own in-house support for servers. However, we use a professional service for storage and three-power or CI systems.

HPE servers are highly user-friendly. It takes two or three hours from start to finish for bare-metal installation. With virtualization, it'll take four to six hours.

We are working with the customers in government and defense, where HPE already has a foothold. The requirements come from the customer, and they use HPE, so we do, too. We have to consider the customer's stability and comfort level. 

I rate HPE ProLiant Servers nine out of 10. In my country, it's better for customers to rely on the vendor who delivers the solution. We think the HPE server is better than others for that.

With HPE ProLiant, you can run a Windows operating system or a Linux OS based on Intel architecture. We also use several applications like iLO to manage the servers within the architecture of our serverless AMD processors. 

Alternatively, you can use another monitoring solution like HP OneView to manage ProLiant Servers. It's a product for monitoring and managing the servers. In addition to monitoring software, ProLiant can be managed with a cloud-based solution. For example, HP's cloud-based InfoSight solution lets you monitor your server and storage, including ProLiant and Intel. 

ProLiant can be mounted in different types of server racks, like a CD or tower. The tower solution of ProLiant is for a small site or office. With this type of tower server, you can add a kit as well. ProLiant has several servers: 150, 350, 380. And there is another ProLiant architecture that you can install in a Synergy and BladeSystem enclosure. 

HPE's iLO server management software is a handy tool to install and deploy. OneView is also suitable for management, but you need a license for it. You can use OneView's monitoring features for free, but you need to pay for management capabilities. In the latest generation, Gen10, you have to add a license for iLO. In addition, generation 10 requires an ISO license to use iLO for management. And if you're working with Synergy, there is another new product like SimpliVity. SimpliVity has a helpful product that is based on ProLiant and another type of architecture similar to Apollo.

It would be great if HP could use a ProLiant Server to run HP-UX, the Unix build from HPE. Right now, HP-UX cannot run on the ProLiant architecture. So if HP made HP-UX compatible with ProLiant Servers, it would be pretty helpful. On the other hand, Linux is also replacing HP-UX, so maybe HP doesn't need to integrate this architecture into ProLiant. 

If you look at ProLiant's trajectory, I think the next generation will be focused on adding memory. Currently, there is a gap in the memory technology, so I'm predicting that the internal disk for the next generation of ProLiant will be RAM only. I believe this high-speed disk will be available in the next generation. I think the disk will be integrated into the RAM architecture. 

With the improved RAM architecture, the disk will be faster than the first-class disk because there are other protocols between memory and disk. If you have your disk, you look at the disk in terms of the motherboard. If you add to the processor, it would be faster. All disks in this architecture will be in the solution's memory.

I've been working with ProLiant for almost 10 years. And two or three months ago, I implemented several ProLiant Servers running Windows. It was a very short project — a  small solution for a small customer. The majority of my experience has been with HPE servers like ProLiant and Integrity. I've been working with HPE products for about 18 years, including HPE infrastructure, storage, and servers products. So I've been working with HPE since my first job after I graduated.

ProLiant Servers are stable because they have redundant elements built in.

I would say ProLiant Servers are scalable, but it also depends on the architecture. You can scale up with Synergy. For example, you can add two servers into one node. So if it's part of the cluster, it also depends on the operating system that's running. 

When our customers deploy a ProLiant server, we're usually the ones providing support. We have a three-year contract for hardware and software support. The procedure for escalating to HP is pretty straightforward. You contact an HP call center then they verify your system handle or serial. If the server has an active contract, the response from the engineer depends on the conditions of the contract. Some contracts are six hours. That means they're going to solve your problem in six hours.

Installing ProLiant is straightforward. There are different ways you can deploy. You can deploy it locally using the graphical user interface, or you also have the option to set it up using a shell. You only need some basic knowledge to install ProLiant. The procedure is pretty similar to setting up a PC or a laptop. ProLiant has an array of tools, so you can easily install the servers without any experience. The installer has a simple Windows-based GUI, so you just click through the wizard and provide some information to the servers. 

You don't need a deep understanding of the architecture. If you have a fundamental knowledge of operating systems like Windows, you can handle this with no problem. Also, HP has a lot of information available online, including video tutorials on installing your ProLiant Servers. HP has several channels to provide information for customers and engineers.

The time needed to deploy depends on the scale and your environment. If you want to deploy just one ProLiant server, it takes maybe 30 minutes. If you're going to deploy a Synergy of BladeSystem with different modules inside, you might need to spend an entire workday on it. Maybe it takes a day to install all your servers or maybe less. But installing a single ProLiant rack-based server can be done in 30 minutes, including installing the operating system. Installing the operating system, updating your system, etc., will take maybe 30 or 40 minutes.

10 out of 10. The latest generation is the best, but Generation 6 was very stable. It was a good one. Now Generation 10 is the best. I don't know why they took so long to upgrade this generation. Still, Generation 10 has improved a lot in memory and processing, so you can operate in an environment that supports ProLiant. That's why I think HP-UX will disappear because Linux can run this environment on the ProLiant architecture very well.

For example, the range of velocity and processor speed is four or five times greater than before. You can run every Linux environment, which can replace the Unix environment. You can run this Linux environment inside the ProLiant and get the same service as a Unix environment. That's why Linux and ProLiant run very well.

There are concerns about the HPE team in the Southeast Asia region, suggesting a need for improvements in terms of responsiveness. There have been instances where the response time was slow, causing challenges during urgent situations. Its stability also needs to improve. 

I have been using the product for five years. 

We haven't received any complaints about the tool's stability. It works properly in a five-year lifetime. 

I rate the solution's scalability an eight out of ten. 

The product's competitor is Dell. 

The solution's deployment was easy. 

The solution's pricing is high. It needs to be more flexible. The flexibility would be beneficial for our clients, especially in a competitive market. Adding additional features and addressing complex requirements on top of the price can be challenging for us as a reseller.

In project tenders, system requirements are specified, including the number of cores, storage, and personnel needed. The information is shared with the HPE team to prepare a BQ specifying the server model to be used. The tool is a good physical server. 

The choice of server category or type is not specific and varies case by case. Customers may initially purchase higher servers than their immediate requirements, anticipating future use cases. It's a complex decision and depends on individual circumstances.

The product's roadmap seems to be good. Its deployments are mostly on-prem due to government regulations.

The product is purchased specifically for security solutions, not for the entire data center stack. It is recommended for medium to enterprise-level customers. 

I rate the overall solution an eight out of ten. 

They should improve the solution's built-in quality.

We have been using the solution for two decades.

It is a stable solution.

The solution is very much scalable. It is possible to deploy and merge more servers to it. But the scalability varies depending on the particular model requirements.

The solution's customer support service needs improvement. The team responds immediately but could be more knowledgeable about various issues.

There are different warranty models available for technical support with the vendors. However, it affects the business workflow because the response gets scheduled according to the subscription plan.

Neutral

The solution's initial setup is straightforward. We need to follow the basic steps.

HP has come up with the GreenLake model. Wherein they set up private clouds using CapEx and OpEx models for customers. They also provide integration with other networking and security components.

I advise others to follow the basic instructions for deployment. Also, they should learn about the solution's framework and features while making a purchase decision. I rate the solution as a seven.

We have several HPE ProLiant DL Server models in use, DL360, 380, and 580.

We use the servers for multiple business services.

The quality and the technical support are the most valuable features.

The cost of the solution has room for improvement.

I am currently using HPE ProLiant DL Servers.

The solution is scalable.

The solution is expensive.

I give the solution a ten out of ten.

We have one SQL server, one repository called Solidworks Designs, and one called Karmatic.

The most valuable feature of the solution is scalability.

The licensing fees are expensive and have room for improvement.

I have been using the solution for three years.

The solution is stable.

The solution is scalable. We purchased enough resources to ensure we could meet our requirements.

The initial setup is straightforward and took a few minutes. The deployment was simple. We only needed to install a Windows server.

The implementation was completed in-house.

We have to pay for an annual license which is expensive.

I give the solution a nine out of ten.

We have twenty people using the solution in our organization and plan to increase that number to 30.

We require five people to maintain the solution consisting of managers and automation engineers.

I recommend the solution to others.

We use the solution for the DR site and run it on the infrastructure system.

The scalability of the product is the same as the Cisco solution and we have the same number of people working with it.

Technical support are mostly helpful.

The pricing is reasonable. We pay approximately 30 to 35K, which is cheap.

The product is lower quality than its competitors in terms of performance. The hardware  was frequently faulty and sometimes broke down. 

I would therefore give it an overall rating of eight out of 10.