Dell NetWorker Reviews

Dell EMC should be more aggressive with its marketing; such as is done by Commvault.

There should be total integration of the replication and cloud logistic back up on cloud.

The stability has been fine thus far. 

The solution is definitely scalable.

Technical support is good. 

The initial setup is completely easy, not hard at all. 

The pricing is okay.

Commvault does more aggressive marketing than Dell EMC. 

Features are constantly evolving. Initially, I dealt with ERP backup, but we have since moved to the environment. Nowadays, there are cloud-related features. We position ourselves to meet the customer's needs, not just concerning any one given feature. 

My advice is that a person who designs a solution for the backup or backup management, ensure that, in respect of the application, all agents take care not to encounter problems once the solution has been deployed. 

I rate Dell EMC Networker as an eight out of ten. 

Our primary use case for the solution is for backup and recovery in all environments, such as physical and virtual ones.

The solution offers compatibility with many types of database systems. It is one of the largest backup solutions. Additionally, it gives important information about data domain systems with deduplication. 

I have been using the solution for approximately three years. 

The solution is stable.

We have more the five customers using Dell EMC NetWorker.

The technical support was slightly impolite in my experience.

The deployment of the solution is easy when integrated with the data domain systems. Additionally, the documentation is available and it is simple to follow. It took approximately one week to deploy it. 

The implementation of the solution took approximately one week and we used two engineers. 

The pricing of the solution is not the cheapest compared to other similar solutions. The Networker is available as a component of the Dell EMC Data Protection Suite package and it should have the ability to be purchased separately. 

The solution requires a perpetual license. We can upgrade the solution without the need to be renewed at an additional cost. 

I would recommend the solution to others, especially due to the data domain system, as the target of the backup.

I rate Dell EMC NetWorker a nine out of ten. 

We use NetWorker for login support for SAP and VMware. I handle all maintenance-related issues on my own.

There's a lot of room for improvement. The user interface has to be improved.

Sometimes it duplicates jobs. Overall, it's a strong legacy product but there's still a lot of room for improvement.

We have to perform the very basic client registration process twice. We have to do it on the client-side and the NetWorker server-side. Sometimes just re-installing a client can be a nightmare. 

Also, the layout can be a bit scattered. It's difficult to learn for a new newcomer. If you work with Linux clients, if you've got another non-Windows system, it's a little bit tough — a little complex.

When it comes to the monitoring of backups, or if you want to grab a certain log, it's not as intuitive as other solutions. For example, if you want to find a backup for a certain client, it's not straightforward. With other solutions, like Avamar, this process is much easier.

Scheduling is complicated. If you use the GUI to create a schedule and you auto mark all your backups SQL, it's simply not there. You have to change the view of the schedule from a calendar view to what they call a non-calendar view. Then you have to modify the attributes. You have to operate in a non-conventional way. Typically, when using the GUI, the expectation is to use the GUI for everything. With this solution, you have to go online to check the logs. You have to do some manipulations here and there — it's complex.

Recovery is also complex. You have to build what we call 'a proper workflow' for recovery. 

It's quite a stable product. 

I would recommend this solution. If it's set up the right way, it's a stable product. So, my advice is to make sure you set it up right the first time. As long as you've done that, it will run for ages.

Overall, on a scale from one to ten, I would give this solution a rating of six.

I feel that it is a good product. However, if its setup is configured correctly, it will work well but if it's not, it's a total disaster. I think that goes for any backup product. Coming into architectural design thinking, for example, we introduced a backup network. This has helped speed up our backup time and the time it took Windows to backup. That has made a huge difference without impacting reduction systems elsewhere that connects into the same systems. So the main thing would be to optimize scheduling and do the setup correctly, then it will improve the backup features. 

There are too many reboots and the software requires constant updating - just like Windows. I don't like that so I feel that it isn't very stable.

The technical support from EMC is 10 out of 10. I am really impressed by it. 

The pricing of this solution is very good.

I will rate this solution an eight out of ten, based on my knowledge and experience on it. In the next version, I would like it if Dell EMC could back up IBM. They call it IBMi, or the A400 system. That would be awesome for the networker. My advice to others would be that they should be very specific who they use to set up the software and make sure they check references for successful installations.

We use this solution for disk storage, and to administer Save and Restore functionality in our client's data center.                                                             

When it was required that data had to be restored for our customer, it was accomplished successfully and this has kept our end users satisfied.                                                    

Stability of NetWorker is very good.

We would like support for tape space reclaim, using either the same or another pool.

NetWorker uses only a stage directed to a clone pool, which is not enough to recover space on the tape.

We use Dell EMC NetWorker for backing up VMs, files, and databases.

The user interface is hard to use, it should be simplified. There are a lot of web-based management interfaces which they should consider.

I have been using Dell EMC NetWorker for approximately eight years.

I have found Dell EMC NetWorker to be stable.

Dell EMC NetWorker is scalable.

The support of Dell EMC NetWorker is very good.

The initial setup is complicated. It is difficult to implement for clients.

The price of the solution could be lower, it is expensive.

We have evaluated Veeam.

I would not recommend this solution, we are switching to Veeam, and I would recommend it.

I rate Dell EMC NetWorker a seven out of ten.

We are system integrators.

We have many systems that are being backed up using NetWorker, mainly in a virtualized environment, with several typical workloads.

It's a good product that can be integrated easily with the Data domain. 

They have many different products but they don't integrate all of the features into one product. This is an area of failure with this solution. For example, if we want source-side deduplication then we have to use Avamar because this kind of feature isn't available in NetWorker.

Some features in NetWorker are good as well as some features in Avamar are good. If they could combine the features of both products into one single product, it would be better.

In the next release, I would like to see better pricing and more integration with the other products in Dell EMC.

We have been using Dell EMC NetWorker for three years.

We are using the latest version.

It's a stable solution and we have not had any issues.

It's a backup system that is backing up more than 50 different systems.

We plan to continue using this solution. It's a good product.

We have contacted technical support and they have provided us with good technical support. 

We have no issues.

Because NetWorker does not provide all of the features such as source-side deduplication, we have had to go with some other products.

The Installation is quite easy. 

The deployment took a maximum of three to four days.

The complete installation needed a bit of extra time due to some downtime for adding systems. But generally, the basic installation and configuration are done within three to four days.

We have a good engineering team and the internal team is capable of handling the implementation.

The price is a little on the high side, but it's reliable and provides a good service.

There are other products on the market with better pricing, which makes it a challenge to sell NetWorker.

I would definitely recommend NetWorker to others who are interested in using it.

I would rate Dell EMC NetWorker an eight out of ten.

It's a very good solution if you are using an Oracle-like environment. It's a very good, very powerful solution, but at the same time, it's a legacy solution. That's why we moved from NetWorker to Commvault.

They need to improve their level of support.

The software also isn't user-friendly like Commvault or Rubrik. The solution errors and management aren't so good in comparison.

The solution is very stable, especially if you are using a RAC environment.

The scalability of the solution is okay.

I was very dissatisfied with technical support. It's one of the reasons we switched to Commvault.

The setup was very difficult. 

We used an integrator for the implementation.

We use the on-premises version of the service. We were also using a legacy solution from EMC.

In terms of recommending the solution, it would be my third choice, behind Rubrik and Commvault. There are newer versions, which are hyper-converged, but I would have to seriously evaluate them before I could recommend them.

I would rate this solution five or six out of ten.